Cisco WRP500 Administration Manual page 67

Appendix A Advanced Voice Fields
R E V I E W D R A F T # 1 — C I S C O C O N F I D E N T I A L
CID Deact Code
CWCID Act Code
CWCID Deact Code
Dist Ring Act Code
Dist Ring Deact Code Disables the distinctive ringing feature.
Speed Dial Act Code
Secure All Call Act
Code
Secure No Call Act
Code
Secure One Call Act
Code
Secure One Call Deact
Code
Conference Act Code
Attn-Xfer Act Code
Modem Line Toggle
Code
FAX Line Toggle
Code
Disables caller ID generation.
The default is *85.
Enables call waiting, caller ID generation.
The default is *25.
Disables call waiting, caller ID generation.
The default is *45.
Enables the distinctive ringing feature.
The default is *26
The default is *46.
Assigns a speed dial number.
The default is *74.
Makes all outbound calls secure.
The default is *16.
Makes all outbound calls not secure.
The default is *17.
Makes the next outbound call secure. (It is redundant if all outbound
calls are secure by default.)
The default is *18.
Makes the next outbound call not secure. (It is redundant if all
outbound calls are not secure by default.)
The default is *19.
If this code is specified, the user must enter it before dialing the
third party for a conference call. Enter the code for a conference
call.
If the code is specified, the user must enter it before dialing the third
party for a call transfer. Enter the code for a call transfer.
Toggles the line to a modem.
The default is *99. Modem pass-through mode can be triggered
only by pre-dialing this code.
Toggles the line to a fax machine.
The default is #99.
Cisco WRP500 Administration Guide
Regional page
A-23