Cisco WRP500 Administration Manual page 100

Setup
R E V I E W D R A F T # 1 — C I S C O C O N F I D E N T I A L
Card Model
Carrier
Country
Carrier
Access Point Name (APN)
Dial Number
User Name and Password
(Optional)
SIM PIN (Optional)
Server Name (Optional)
Authentication
Service Type
Cisco WRP500 Administration Guide
B-10
The data card model that is inserted in the USB port.
The mobile network service provider for Internet
connection. This setting is required when you are using
HSDPA/UMTS/GPRS Internet service.
The card issue country
The card issue provider
The name that the mobile network service provider has
assigned to the particular Internet network for this
connection.
The dial number that is used to access the mobile
network service.
The user name and password, if any, provided by your
mobile network service provider.
The PIN code associated with your SIM card, if
required.
The name of the server for the Internet connection, if
required.
The type of authentication used by your service
provider.
Default: Auto
The most commonly available type of mobile data
service connection based on your area service signal. If
your location supports only one mobile data service,
you may set up for enhance build up connection. The
first selection will always search for
HSPDA/3G/UMTS service or switch to GPRS
automatically only when it is available.
Appendix B Data Fields