Cisco Linksys WRT350N Quick Installation Manual
  1. Manuals
  2. Brands
  3. Cisco Manuals
  4. Network Router
  5. WRT350N
  6. Quick installation manual
Cisco Linksys WRT350N Quick Installation Manual

Cisco Linksys WRT350N Quick Installation Manual

Wireless-n gigabit router with storage link
Hide thumbs Also See for Linksys WRT350N:
Table of Contents

Advertisement

Quick Links

Download this manual
24 ,
GHz
Wireless
Wireless
WRT350N (EU/LA/UK)
Model No.
Model No.
Package Contents
• Wireless-N Gigabit Router with Storage Link
• Setup CD-ROM with Norton Internet Security
• User Guide on CD-ROM
• Ethernet Network Cable
• Power Adapter
• Quick Installation
Wireless-N
Gigabit Router
with Storage Link
Quick Installation Guide
1

Advertisement

Table of Contents
loading

Related Manuals for Cisco Linksys WRT350N

Summary of Contents for Cisco Linksys WRT350N

  • Page 1 Package Contents • Wireless-N Gigabit Router with Storage Link • Setup CD-ROM with Norton Internet Security • User Guide on CD-ROM • Ethernet Network Cable • Power Adapter • Quick Installation 24 , Wireless-N Gigabit Router with Storage Link Wireless Wireless Quick Installation Guide WRT350N (EU/LA/UK)
  • Page 2 There are two ways to configure the Router. Choose one of the following: • Run the Setup CD-ROM - Insert the Setup CD-ROM into the CD-ROM drive, and follow the on-screen instructions. • Use this Quick Installation guide - If you wish, you can use the Router’s Web-based Utility.
  • Page 3 Connect one end of an Ethernet network cable to one of the numbered ports on the back of the Router. Connect the other end to an Ethernet port on a network device, e.g., a PC, print server, or switch. Repeat this step to connect more PCs or other network devices to the Router.
  • Page 4 Configure the Router NOTE: Make sure your PC’s Ethernet adapter is set to obtain an IP address automatically. For more information, refer to Windows Help. Open your web browser. Enter http://192.168.1.1 in its Address field. Press the Enter key. A password request screen will User name appear.
  • Page 5 For the Internet Connection Type setting, six connection types are offered through the drop-down men. Each Setup screen and available features will differ depending on which connection type you select. Internet Configuration Type Automatic Configuration - DHCP: If you are connecting through DHCP DHCP or a dynamic IP address from your ISP , keep this default setting.
  • Page 6 PPTP: PPTP is a service used in Server Europe only. Complete the IP Address Subnet Mask , and Default Gateway fields. User Name Complete the PPTP Password fields. Select Keep Alive if you always want to be connected to your ISP , or select Connect on Demand if you are charged for the time that you are connected to your ISP .
  • Page 7 Network Name (SSID). The SSID is the network name shared by all devices in a wireless network. It is case-sensitive and must not have more than 32 characters (use any keyboard character). For added security, change the default SSID (linksys) to a unique name. Radio Band.
  • Page 8 Wireless SSID Broadcast. When wireless clients survey the local area for wireless networks to associate with, they will detect the SSID broadcast by the Router. To broadcast the Router's SSID, keep the default, Enabled. If you do not want to broadcast the Router's SSID, then select Disabled.
  • Page 9 Configure Wireless Security Open the Router’s Web Utility as shown in Step 2, and click the Wireless tab. Click the Wireless Security tab. Select the security method you want to use: PSK/PSK2 Personal, WEP , PSK/PSK2 Enterprise, or RADIUS. For PSK/PSK2 Personal and WEP , proceed to the appropriate instructions.
  • Page 10 Website latest firmware updates. http://www.linksys.com/international Product Registration http://www.linksys.com/registration Linksys is a registered trademark or trademark of Cisco Systems, Inc. and/or its affiliates in the U.S. and certain other countries. Copyright © 2007 Cisco Systems, Inc. All rights reserved. WRT350N-EU-LA-UK_V2-QIG-70117A JL...
  • Page 11 Pakkens indhold • Trådløs-N Gigabit-router med storage link • Installations-cd-rom med Norton Internet Security • Brugervejledning på cd-rom • Ethernet-netværkskabel • Strømforsyning • Installationsvejledning 24 , Trådløs-N Gigabit-router med storage link Trireless Installationsvejledning WRT350N (DK) Modelnr. Modelnr.
  • Page 12 Du kan konfigurere routeren på to måder. Vælg en af følgende: • Kør installations-cd-rom'en - sæt den i cd-rom-drevet, og følg vejledningen på skærmen. • Brug denne installationsvejledning - du kan eventuelt bruge routerens webbaserede hjælpeprogram. Gå videre til trin 1 i installationsvejledningen. Tilslutning af routeren Kontroller, at al hardware er slukket, herunder...
  • Page 13 Tilslut den ene ende af et Ethernet-kabel til en af de nummererede porte bag på routeren. Tilslut den anden ende til en Ethernet-port på en netværksenhed, f.eks. en pc, printerserver eller switch. Gentag dette trin for at tilslutte flere pc'er eller andre netværksenheder til routeren.
  • Page 14 Konfiguration af routeren Sørg for, at pc'ens Ethernet- BEMÆRK: netværkskort er indstillet, så det automatisk henter en IP-adresse. Yderligere oplysninger finder du i Windows Hjælp. Åbn webbrowseren. Indtast http://192.168.1.1 i feltet Address (Adresse). Tryk på Enter. Der vises et skærmbillede til indtastning af en adgangskode.
  • Page 15 Du har mulighed for at vælge mellem seks internetforbindelsestyper i rullemenuen. Konfigurationsskærmbillederne og de tilgængelige funktioner varierer, afhængigt af hvilken forbindelsestype du vælger. Internet Connection Type (Internetforbindelsestype) Automatic Configuration - DHCP (Automatisk konfiguration - DHCP): DHCP Hvis du opretter forbindelse via DHCP eller en dynamisk IP-adresse fra din internetudbyder, skal du beholde denne standardindstilling.
  • Page 16 forbindelse efter behov), hvis du betaler for den tid, du har forbindelse til din internetudbyder. PPTP: PPTP er en tjeneste, der kun bruges i Europa. Server IP Address Udfyld felterne (IP- Subnet Mask adresse til server), Default (Undernetmaske) og PPTP Gateway (Standard-gateway).
  • Page 17 Basic Vælg skærmbilledet Wireless Settings (Basisindstillinger for trådløs) under fanen Wireless (Trådløs) for at konfigurere routeren til dit trådløse netværk. Vælg netværkstilstand. Mixed (Blandet): Hvis du har Trådløs-N, -G og -B-enheder, skal du beholde standardindstillingen Mixed (Blandet). Disable (Deaktiver): Vælg Disable (Deaktiver), hvis du deaktivere de trådløse netværksforbindelser.
  • Page 18 Wide Channel (Bred kanal). Hvis du har valgt Wide - 40MHz Channel (Bred – 40 MHz-kanal) som frekvensområde, er denne indstilling tilgængelig for din primære Trådløs-N-kanal. Vælg en kanal i rullemenuen. Standard Channel (Standardkanal). Vælg denne kanal til Trådløs-N-, -G- og -B- netværk.
  • Page 19 Sluk og tænd bredbåndsmodemmet. Genstart eller tænd dine pc'er, så de kan hente routerens nye indstillinger. Test routerens indstillinger ved at åbne webbrowseren på en computer. Indtast www.linksys.com/registration Address feltet (Adresse) i webbrowseren, og tryk på Enter. Tillykke! Installationen af Trådløs-N Gigabit-routeren med storage link er færdig.
  • Page 20 Konfigurer trådløs sikkerhed Åbn routerens webhjælpeprogram som vist under trin 2, og klik på fanen Wireless (Trådløs). Klik på fanen Wireless Security (Trådløs sikkerhed). Vælg den sikkerhedsmetode, du vil bruge: PSK/PSK2 Personal, WEP , PSK/PSK2 Enterprise eller RADIUS. For PSK/PSK2 Personal og WEP skal du fortsætte til den relevante vejledning.
  • Page 21 (Trådløs sikkerhed) er nu konfigureret Produktregistrering på routeren. http://www.linksys.com/registration Linksys er et registreret varemærke tilhørende Cisco Systems, Inc. og/eller Cisco Systems' associerede selskaber i USA og visse andre lande. Copyright © 2007 Cisco Systems, Inc. Alle rettigheder forbeholdes. WRT350N-DK_V2-QIG-70117A JL...
  • Page 22 Lieferumfang • Wireless-N Gigabit Router mit Storage Link • Installations-CD-ROM mit Norton Internet Security • Benutzerhandbuch auf CD-ROM • Ethernet-Netzwerkkabel • Netzteil • Kurzanleitung 24 , Wireless-N Gigabit Router mit Storage Link Wireless Wireless Kurzanleitung WRT350N (DE) Modell-Nr. Modell-Nr.
  • Page 23 Sie können den Router auf zwei Arten konfigurieren. Wählen Sie eine der folgenden Methoden aus: • Ausführen der Installations-CD-ROM: Legen Sie die Installations-CD-ROM in das CD-ROM-Laufwerk ein, und befolgen Sie die Anweisungen auf dem Bildschirm. • Verwenden der Kurzanleitung – Sie können auch das integrierte webbasierte Dienstprogramm des Routers verwenden.
  • Page 24 Schließen Sie ein Ende des Ethernet-Netzwerkkabels an einen der nummerierten Ports auf der Rückseite des Routers an. Schließen Sie dann das andere Ende an einen Ethernet- Port eines Netzwerkgeräts an (z. B. PC, Druckserver oder Switch). Wiederholen Sie diesen Schritt, um weitere PCs oder andere Netzwerkgeräte an den Router anzuschließen.
  • Page 25 Konfigurieren des Routers HINWEIS: Stellen Sie sicher, dass der Ethernet-Adapter Ihres PCs so eingestellt ist, dass er automatisch eine IP-Adresse bezieht. Weitere Informationen hierzu finden Sie in der Windows-Hilfe. Öffnen Sie Ihren Web-Browser. Geben Sie http://192.168.1.1 in Adressfeld ein. Drücken Sie die Eingabetaste.
  • Page 26 erforderlich.) Lassen Sie die Felder anderenfalls leer. Im Dropdown-Menü stehen zur Einstellung des Internet- Verbindungstyps sechs Verbindungstypen zur Verfügung. Die Einrichtungsfenster und verfügbaren Funktionen unterscheiden sich je nach ausgewähltem Verbindungstyp. Internet Connection Type (Internet-Verbindungstyp) Automatic Configuration – DHCP DHCP (Automatische Konfiguration – DHCP): Behalten Sie diese Standardeinstellung bei, wenn Sie Verbindungen über DHCP bzw.
  • Page 27 (Bei Bedarf verbinden), falls die Verbindungszeit mit Ihrem ISP gebührenpflichtig ist. PPTP: PPTP ist ein Dienst, der nur in Europa verwendet wird. Server IP Address Füllen Sie die Felder Subnet Mask (IP-Adresse des Servers), PPTP Default (Subnetzmaske) und Gateway (Standard-Gateway) aus. User Name Füllen Sie die Felder Password...
  • Page 28 wählen Sie in der Registerkarte Basic Wireless das Fenster Wireless Settings (Grundlegende Wireless-Einstellungen) aus. Wählen Sie den Netzwerkmodus aus. Mixed (Gemischt): Behalten Sie die Standardeinstellung Mixed (Gemischt) bei, wenn Ihr Netzwerk Wireless-N-, Wireless-G- und Wireless-B-Geräte enthält. Disable (Deaktivieren): Um das Wireless-Netzwerk zu deaktivieren, wählen Sie Disable (Deaktivieren).
  • Page 29 wählen Sie Standard – 20MHz Channel (20-MHz-Standard- kanal) aus. Wide Channel (Wide-Channel): Wenn Sie Wide – 40MHz Channel (40-MHz-Wide-Channel) als Einstellung für Radio Band (Frequenzband) ausgewählt haben, steht die Einstellung für Ihren primären Wireless-N-Kanal zur Verfügung. Wählen Sie im Dropdown-Menü einen belie- bigen Kanal aus.
  • Page 30 Schalten Sie Ihr Breitband- Modem aus und anschließend wieder ein. Starten Sie Ihre PCs neu, oder schalten Sie sie wieder ein, sodass die neuen Einstellungen des Routers übernommen werden können. Öffnen Sie Ihren Web-Browser auf einem beliebigen Computer, um die Einstellungen des Routers zu überprüfen.
  • Page 31 Konfigurieren der Wireless-Sicherheit Öffnen Sie das webbasierte Dienstprogramm des Routers wie in Schritt 2 erklärt, und klicken Sie auf die Registerkarte Wireless. Klicken Sie auf die Registerkarte Wireless Security (Wireless-Sicherheit). Wählen Sie die gewünschte Sicherheitsmethode aus: PSK/PSK2 Personal (PSK-/PSK2-Personal), WEP , PSK/PSK2 Enterprise (PSK-/PSK2- Enterprise) oder RADIUS.
  • Page 32 Linksys ist eine eingetragene Marke bzw. eine Marke von Cisco Systems, Inc. und/oder deren Gratulation! Wireless-Sicherheit ist Zweigunternehmen in den USA und anderen Ländern. Copyright © 2007 Cisco Systems, Inc. nun auf dem Router konfiguriert. Alle Rechte vorbehalten. WRT350N-DE_V2-QIG-70117A JL...
  • Page 33 Contenido del paquete • Router Wireless-N Gigabit con enlace de almacenamiento • CD-ROM de configuración con Norton Internet Security • Guía del usuario en CD-ROM • Cable de red Ethernet • Adaptador de corriente • Guía de instalación rápida 24 , Wireless-N Router Gigabit con enlace de almacenamiento...
  • Page 34 Puede configurar el ruteador de dos formas. Seleccione una de las siguientes: • Ejecutar el CD-ROM de configuración: Introduzca el CD-ROM de configuración en la unidad de CD-ROM y siga las instrucciones que aparecen en la pantalla. • Utilizar esta guía de instalación rápida: Si lo desea, puede usar la utilidad basada en Web del ruteador.
  • Page 35 Conecte un extremo del cable de red Ethernet a uno de los puertos numerados de la parte posterior del ruteador. Conecte el otro extremo a un puerto Ethernet de un dispositivo de red, por ejemplo, un PC, un servidor de impresión o un conmutador.
  • Page 36 Configuración del ruteador Asegúrese de que el adaptador NOTA: Ethernet del PC está establecido para obtener una dirección IP automáticamente. Para obtener más información, consulte la ayuda de Windows. Abra el explorador Web. Escriba http://192.168.1.1 en el Dirección campo . Pulse la tecla Entrar.
  • Page 37 En el parámetro Internet Connection Type (Tipo de conexión a Internet) se ofrecen seis tipos de conexión en el menú desplegable. Cada pantalla Setup (Configuración) y las funciones disponibles son distintas según el tipo de conexión que seleccione. Internet Connection Type (Tipo de conexión a Internet) Automatic Configuration - DHCP (Configuración automática -...
  • Page 38 PPTP: PPTP es un servicio que sólo se utiliza en Europa. Server IP Rellene los campos Address (Dirección IP del Servidor), Subnet Mask (Máscara de subred) y PPTP Default Gateway (Puerta de enlace predeterminada). User Name Rellene los campos Password (Nombre de usuario) y (Contraseña).
  • Page 39 Seleccione el modo de red (Network Mode). Mixed (Modo mixto): Si cuenta con dispositivos Wireless-N, -G y - B, mantenga el parámetro predeterminado, Mixed (Mixto). Disable (Desactivar): Para desactivar la red inalámbrica, seleccione Disable (Desactivar). Network Name (SSID) (Nombre de la red (SSID)). El SSID es un nombre de red que comparten todos los dispositivos de una red inalámbrica.
  • Page 40 Wide Channel (Canal ancho). Si ha seleccionado el canal de 40 MHz como parámetro de la banda de radio, este parámetro estará disponible en el canal Wireless-N primario. Seleccione cualquier canal del menú desplegable. Standard Channel (Canal estándar). Seleccione el canal para las redes Wireless-N, -G y - B.
  • Page 41 Reinicie o encienda los PC para que obtengan los nuevos parámetros del ruteador. Para probar dichos parámetros, abra el explorador Web en cualquier ordenador. En el Dirección campo explorador, escriba www.linksys.com/registration pulse la tecla Entrar. ¡Enhorabuena! La instalación del Router Wireless-N Gigabit con enlace de almacenamiento ha finalizado.
  • Page 42 Configuración de la seguridad inalámbrica Abra la utilidad Web del ruteador como se muestra en el paso 2 y haga clic en la ficha Wireless (Inalámbrico). Haga clic en la ficha Wireless Security (Seguridad inalámbrica). Seleccione el método de seguridad que desea utilizar: PSK/PSK2 Personal, WEP , PSK/ PSK2 Enterprise o RADIUS.
  • Page 43 Linksys es una marca registrada o marca comercial de Cisco Systems, Inc. y/o sus filiales ¡Enhorabuena! La seguridad en EE.UU. y otros países. Copyright © 2007 Cisco Systems, Inc. Todos los derechos reservados. inalámbrica ya está configurada en el ruteador.
  • Page 44 Contenu de l'emballage • Routeur Gigabit sans fil N avec liaison de stockage • CD-ROM d'installation contenant Norton Internet Security • Guide de l'utilisateur sur CD-ROM • Câble réseau Ethernet • Adaptateur électrique • Guide d'installation rapide 24 , Sans fil - Routeur Gigabit avec liaison de stockage Sans fil...
  • Page 45 Deux procédures permettent de configurer le routeur. Choisissez l'une des deux méthodes suivantes : • Exécutez le CD-ROM d'installation : insérez le CD-ROM d'installation dans le lecteur de CD-ROM, puis suivez les instructions à l'écran. • Utilisez ce guide d'installation rapide. Si vous le souhaitez, vous pouvez utiliser l'utilitaire Web du routeur.
  • Page 46 Reliez une extrémité d'un câble réseau Ethernet à l'un des ports numérotés situés à l'arrière du routeur. Branchez l'autre extrémité à un port Ethernet de l'un des périphériques du réseau (par ex. un ordinateur, un serveur d'impression ou un commutateur). Procédez de même pour relier d'autres ordinateurs ou périphériques réseau au routeur.
  • Page 47 Configuration du routeur Assurez-vous que REMARQUE : l'adaptateur Ethernet de votre ordinateur est configuré pour obtenir automatiquement une adresse IP. Pour de plus amples informations, reportez-vous à l'aide de Windows. Ouvrez votre navigateur Web. Saisissez http://192.168.1.1 Adresse dans le champ Appuyez sur la touche Entrée.
  • Page 48 laissez ces champs vides. Six types de connexion sont proposés dans le menu déroulant Internet Connection Type (Type de connexion Internet). Les écrans d'installation et les options disponibles varient selon le type de connexion que vous sélectionnez. Internet Connection Type (Type de connexion Internet) Automatic Configuration - DHCP (Configuration automatique -...
  • Page 49 (Connexion à la demande) si vous êtes facturé en fonction de la durée de connexion à votre FAI. PPTP : ce service est utilisé en Europe uniquement. Server IP Complétez les champs Address (Adresse IP du serveur), Subnet Mask (Masque de sous- PPTP Default Gateway réseau) et...
  • Page 50 Basic fil, sélectionnez l'écran Wireless Settings (Paramètres sans fil de base) de l'onglet Wireless (Sans fil). Sélectionnez le mode réseau. Mixed (Mixte) : si votre réseau comporte des périphériques sans fil N, G et B, conservez le paramètre par défaut, Mixed (Mixte).
  • Page 51 périphériques sans fil G ou B, sélectionnez Standard - 20MHz Channel (Standard - Canal 20 MHz). Wide Channel (Canal à large bande) : si vous avez sélectionné Wide - 40MHz Channel (Large bande - Canal 40 MHz) comme paramètre de bande radio, ce paramètre sera disponible pour votre canal sans fil N principal.
  • Page 52 les paramètres) pour appliquer vos modifications. Mettez votre modem haut débit hors tension, puis de nouveau sous tension. Redémarrez ou mettez vos ordinateurs sous tension pour qu'ils puissent charger les nouveaux paramètres du routeur. Testez les paramètres du routeur en ouvrant un navigateur Web à partir de n'importe quel ordinateur.
  • Page 53 Configuration de la sécurité sans fil Ouvrez l'utilitaire Web du routeur comme indiqué à l'étape 2 et cliquez sur l'onglet Wireless (Sans fil). Cliquez sur l'onglet Wireless Security (Sécurité sans fil). Sélectionnez la méthode de sécurité que vous souhaitez utiliser : PSK/PSK2 Personal (PSK/ PSK2 personnel), WEP , PSK/PSK2 Enterprise (PSK/PSK2 entreprise) ou RADIUS.
  • Page 54 Linksys est une marque déposée ou une marque commerciale de Cisco Systems, Inc. et/ou de ses Félicitations ! La sécurité sans fil du filiales aux Etats-Unis et dans certains autres pays. Copyright © 2007 Cisco Systems, Inc. Tous droits routeur est configurée.
  • Page 55 Contenuto della confezione • Router Gigabit Wireless-N con link di memorizzazione • CD-ROM per l'installazione guidata con Norton Internet Security • Guida per l'utente su CD-ROM • Cavo di rete Ethernet • Adattatore di corrente • Guida di installazione rapida 24 , Wireless-N Router Gigabit...
  • Page 56 È possibile configurare il router in due modi diversi. Scegliere una delle modalità riportate di seguito. • Eseguire il CD-ROM per l'installazione. Inserire il CD-ROM per l'installazione nell'apposita unità e seguire le istruzioni visualizzate sullo schermo. • Seguire le istruzioni riportate in questa Guida di installazione rapida. Se lo si desidera, è...
  • Page 57 Collegare un'estremità del cavo di rete Ethernet a una delle porte numerate presenti sul retro del router. Collegare l'altra estremità a una porta Ethernet su una periferica di rete, ad esempio un PC, un server di stampa o uno switch. Ripetere questa operazione per collegare altri PC o periferiche di rete al router.
  • Page 58 Configurazione del router Assicurarsi che l'adattatore NOTA Ethernet del computer sia impostato in modo da ottenere automaticamente un indirizzo IP. Per ulteriori informazioni, consultare la Guida in linea di Windows. Aprire il browser Web. Immettere http://192.168.1.1 nel campo Indirizzo . Premere il tasto Invio. Viene visualizzata una schermata in cui si chiede di immettere la password.
  • Page 59 Nel menu a discesa Internet Connection Type (Tipo di connessione Internet) sono disponibili sei opzioni. Le schermate di configurazione e le relative funzioni variano a seconda del tipo di connessione selezionato. Internet Connection Type (Tipo di connessione Internet) Automatic Configuration - DHCP (Configurazione automatica - DHCP DHCP): se si è...
  • Page 60 PPTP: è un servizio utilizzato esclusivamente in Europa. Server IP Completare i campi Address (Indirizzo IP server), Subnet Mask (Maschera di sottorete) e PPTP Default Gateway (Gateway predefinito). User Name Completare i campi Password . (Nome utente) e Selezionare Keep Alive (Connessione sempre attiva) se si desidera essere sempre collegati al provider di servizi Internet oppure...
  • Page 61 Selezionare l'opzione Network Mode (Modalità di rete). Mixed (Mista): se sono collegate in rete periferiche Wireless-N, Wireless-G e Wireless-B, lasciare l'impostazione predefinita, Mixed (Mista). Disable (Disattiva): per disattivare la connessione di rete, selezionare Disable (Disattiva). Network Name (SSID) (Nome della rete - SSID). L'SSID è il nome di rete condiviso da tutte le periferiche presenti in una rete wireless.
  • Page 62 Wide Channel (Canale ampio). Se è stata selezionata l'opzione Wide - 40MHz Channel (Canale ampio - 40 MHz) per l'impostazione Radio Band (Banda radio), tale impostazione sarà disponibile per il canale Wireless-N primario. Selezionare un canale dal menu a discesa. Standard Channel (Canale standard).
  • Page 63 Riavviare o accendere i computer in modo che possano ricevere le nuove impostazioni del router. Per verificare le impostazioni del router, aprire il browser Web da uno dei computer. Nel campo Indirizzo del browser, immettere www.linksys.com/registration e premere il tasto Invio. Congratulazioni! La procedura di installazione del Router Gigabit Wireless-N con link di...
  • Page 64 Configurazione della protezione wireless Aprire l'utilità del router basata sul Web come mostrato nella fase 2, quindi fare clic sulla scheda Wireless. Fare clic sulla scheda Wireless Security (Protezione wireless). Selezionare il metodo di protezione che si desidera utilizzare: PSK/PSK2 Personal, WEP , PSK/PSK2 Enterprise o RADIUS.
  • Page 65 è ora configurata sul router. Linksys è un marchio o marchio registrato di Cisco Systems, Inc. e/o delle relative aziende affiliate negli Stati Uniti e in altri Paesi. Copyright © 2007 Cisco Systems, Inc. Tutti i diritti riservati. WRT350N-IT_V2-QIG-70117A JL...
  • Page 66 Inhoud van de verpakking • Wireless-N Gigabitrouter met Storage Link • Cd-rom met Norton Internet Security • Gebruikershandleiding op cd-rom • Ethernet-netwerkkabel • Netstroomadapter • Installatiehandleiding 24 , Wireless-N Gigabitrouter met Storage Link Wireless Wireless Installatiehandleiding WRT350N (NL) Modelnr. Modelnr.
  • Page 67 Er zijn twee manieren om de router te configureren. Kies een van de volgende opties: • Gebruik de installatie-cd-rom. Plaats de installatie-cd-rom in het cd-romstation en volg de instructies op het scherm. • Gebruik deze installatiehandleiding. Als u wilt, kunt u het webgebaseerde hulpprogramma van de router gebruiken.
  • Page 68 Sluit het uiteinde van een Ethernet-netwerkkabel aan op een van de genummerde poorten op de achterkant van de router. Sluit het andere uiteinde aan op een Ethernet- poort op een netwerkapparaat, bijvoorbeeld een computer, afdrukserver of switch. Voer deze stap nogmaals uit om meerdere computers of andere netwerkapparaten met de router te verbinden.
  • Page 69 Configureer de router Zorg ervoor dat de OPMERKING: Ethernet-adapter van uw pc automatisch een IP-adres verkrijgt. Raadpleeg Windows Help voor meer informatie. Open uw webbrowser. Typ http://192.168.1.1 in het veld Adres. Druk op de toets Enter. Er verschijnt nu een venster waarin u uw wachtwoord kunt invoeren.
  • Page 70 Voor de instelling Internet Connection Type (Type internetverbinding) worden zes verbindingstypen in het vervolgkeuzemenu aangeboden. Het venster Setup (Instellingen) en de beschikbare functies zijn bij elk geselecteerd verbindingstype weer anders. Internet Connection Type (Type internetverbinding) Automatic Configuration - DHCP (Automatische configuratie DHCP): DHCP maakt u verbinding via DHCP of een dynamisch IP-adres van uw...
  • Page 71 PPTP: PPTP is een service die alleen in Europa wordt gebruikt. Server IP Address Vul de velden Subnet Mask (IP-adres server), PPTP Default (Subnetmasker) en Gateway (Standaardgateway) in. User Name Vul de velden Password (Gebruikersnaam) en (Wachtwoord) in. Selecteer Keep Alive (Continu verbinding houden) als u altijd verbonden wilt zijn met uw ISP of selecteer Connect on Demand...
  • Page 72 Selecteer de netwerkmodus. Mixed (Gemengd): Behoud de standaardinstelling, Mixed (Gemengd), als uw netwerk Wireless-N-, -G- en -B- apparaten heeft. Disable (Uitschakelen): Selecteer Disable (Uitschakelen) als u draadloze netwerken wilt uitschakelen. Network Name (SSID) (Netwerknaam (SSID)). De SSID is de netwerknaam die door alle apparaten in een draadloos netwerk wordt gedeeld.
  • Page 73 Wide Channel (Breed kanaal). Als u Wide – 40MHz Channel (Breed – 40-MHz kanaal) hebt geselecteerd voor de radiobandinstelling, is deze instelling beschikbaar voor uw primaire Wireless-N-kanaal. Selecteer een kanaal in het vervolgkeuzemenu. Standard Channel (Standaardkanaal). Selecteer het kanaal voor Wireless-N-, -G- en -B-netwerken.
  • Page 74 Start uw pc's opnieuw of schakel ze in, zodat de nieuwe instellingen van de router van kracht kunnen worden. Als u de instellingen van de router wilt testen, opent u de webbrowser op een willekeurige computer. Typ www.linksys.com/registration Adres het veld van uw browser en druk op de toets Enter.
  • Page 75 Draadloze beveiliging configureren Open het webgebaseerde hulpprogramma van de router zoals beschreven in stap 2 en klik op het tabblad Wireless (Draadloos). Klik op het tabblad Wireless Security (WLAN-beveiliging). Selecteer de beveiligings- methode die u wilt gebruiken: PSK/PSK2 Personal, WEP , PSK/ PSK2 Enterprise of RADIUS.
  • Page 76 Gefeliciteerd! De draadloze Linksys is een geregistreerd handelsmerk van beveiliging is nu op de router Cisco Systems, Inc. en/of zijn geconfigureerd. dochterondernemingen in de VS en bepaalde andere landen. Copyright © 2007 Cisco Systems, Inc. Alle rechten voorbehouden. WRT350N-NL_V2-QIG-70117A JL...
  • Page 77 Conteúdo da embalagem • Router gigabit sem fios N com ligação de armazenamento • CD-ROM de configuração com Norton Internet Security • CD-ROM com Manual do Utilizador • Cabo de rede Ethernet • Transformador • Instalação Rápida 24 , Sem fios Router gigabit com ligação de armazenamento Wireless...
  • Page 78 Existem dois modos de configurar o Router. Escolha um dos seguintes: • Executar o CD-ROM de configuração - Coloque o CD-ROM de configuração na unidade de CD-ROM e siga as instruções apresentadas no ecrã. • Utilizar este Manual de Instalação Rápida - Se pretender, poderá utilizar o Utilitário baseado na Web do Router.
  • Page 79 Ligue uma extremidade do cabo de rede Ethernet a uma das portas numeradas na parte posterior do Router. Ligue a outra extremidade a uma porta Ethernet num dispositivo de rede, como, por exemplo, um computador, servidor de impressão ou comutador. Repita este passo para ligar mais computadores ou outros dispositivos de rede ao Router.
  • Page 80 Configurar o router Certifique-se de que a placa NOTA: Ethernet do computador está definida para obter um endereço IP automaticamente. Para obter mais informações, consulte a Ajuda do Windows. Abra o Web browser. Introduza http://192.168.1.1 no Endereço respectivo campo Prima a tecla Enter. Será...
  • Page 81 campos.) Caso contrário, deixe os campos em branco. Para a definição de Internet Connection Type (Tipo de ligação à Internet), são fornecidos seis tipos de ligação através do menu pendente. Os ecrãs Setup (Configurar) e as funcionalidades disponíveis variarão consoante o tipo de ligação seleccionado.
  • Page 82 Connect on Demand (Ligar mediante pedido) se for cobrado pelo tempo que está ligado ao ISP . PPTP: PPTP é um serviço utilizado apenas na Europa. Server IP Preencha os campos Address (Endereço IP do servidor), Subnet Mask (Máscara de PPTP Default Gateway sub-rede) e...
  • Page 83 Para configurar o Router na rede sem fios, seleccione o ecrã Basic Wireless Settings (Definições sem fios básicas) do separador Wireless (Sem fios). Seleccione o Network Mode (Modo de rede). Mixed (Misto): Se existirem dispositivos Sem fios N, G e B na rede, mantenha a predefinição, Mixed (Misto).
  • Page 84 dispositivos Sem fios G e B, seleccione Standard - 20MHz Channel (Padrão - Canal de 20MHz). Wide Channel (Canal de banda larga). Se seleccionou Wide - 40MHz Channel (Banda larga - Canal de 40MHz) para a definição Radio Band (Banda de rádio), esta definição estará...
  • Page 85 Altere as definições, conforme aqui se descreve, e clique no botão Save Settings (Guardar definições) para aplicar as alterações. Desligue e volte a ligar o modem de banda larga. Reinicie ou ligue os computadores, para obterem as novas definições do Router. Para testar as definições do Router, abra o browser a partir de um dos computadores.
  • Page 86 Configurar a segurança sem fios Abra o Utilitário baseado na Web do Router, conforme é mostrado no Passo 2, e clique no separador Wireless (Sem fios). Clique no separador Wireless Security (Segurança sem fios). Seleccione o método de segurança que pretende utilizar: PSK/PSK2 Personal, WEP , PSK/PSK2 Enterprise ou RADIUS.
  • Page 87 Linksys é uma marca registada ou marca Parabéns! A segurança sem fios comercial da Cisco Systems, Inc. e/ou das está configurada no Router. respectivas afiliadas nos E.U.A. e noutros países. Copyright © 2007 Cisco Systems, Inc. Todos os direitos reservados. WRT350N-PT_V2-QIG-70117A JL...
  • Page 88 Innehåll i förpackningen • Wireless-N Gigabit-router med Storage Link • Installations-cd med Norton Internet Security • Användarhandbok på cd-skiva • Ethernet-nätverkskabel • Strömadapter • Snabbinstallation 24 , Wireless-N Gigabit-router med Storage Link Wireless Snabbinstallationshandbok WRT350N (SE) Modellnr Modellnr...
  • Page 89 Du kan konfigurera routern på två sätt. Välj något av följande alternativ: • Kör installations-cd:n – Sätt in installations-cd:n i cd-enheten och följ anvisningarna på skärmen. • Använd snabbinstallationshandboken. Om du vill kan du även använda routerns webbaserade verktyg. Fortsätt till steg 1 i den här snabbinstallationen.
  • Page 90 Anslut ena änden av en Ethernet-nätverkskabel till en av de numrerade portarna på baksidan av routern. Anslut den andra änden till en Ethernet- port på en nätverksenhet, t.ex. en dator, skrivarserver eller switch. Upprepa det här steget när du vill ansluta fler datorer eller andra nätverksenheter till routern.
  • Page 91 Konfigurera routern Kontrollera att datorns OBS! Ethernet-adapter är inställd på Hämta IP-adress automatiskt. Mer information finns i Windows-hjälpen. Öppna webbläsaren. Ange http://192.168.1.1 i fältet Adress . Tryck på Enter. Ett fönster visas där du blir ombedd att ange lösenord. Lämna fältet User Name (Användarnamn) tomt och skriv sedan standardlösenordet...
  • Page 92 För inställningen av Internet- anslutningstyp kan du välja mellan sex olika anslutningstyper i listrutan. Alla inställningsfönster och tillgängliga funktioner skiljer sig åt beroende på vilken anslutningstyp du väljer. Internet Connection Type (Internet-anslutningstyp) Automatic Configuration - DHCP (Automatisk konfiguration – DHCP): DHCP Behåll standardinställningen om du ansluter via DHCP eller en...
  • Page 93 PPTP: PPTP är en tjänst som endast används i Europa. Server IP Address Fyll i fälten Subnet Mask (Serverns IP-adress), PPTP Default Gateway (Nätmask) och (Standardgateway). User Name Fyll i fälten Password (Användarnamn) och (Lösenord). Välj Keep Alive (Behåll anslutningen) om du alltid vill vara ansluten till Internet, eller välj Connect on Demand (Anslut på...
  • Page 94 Välj Network Mode (Nätverksläge). Mixed (Blandat läge): Om du har Wireless-N-, -G- och -B- enheter i nätverket är standardinställningen Mixed (Blandat läge). Disable (Avaktivera): Om du vill avaktivera det trådlösa nätverket väljer du Disable (Avaktivera). Network Name (SSID) (Nätverksnamn (SSID)). SSID:t är det nätverksnamn som används för alla enheter i ett trådlöst nätverk.
  • Page 95 Wide Channel (Bred kanal). Om du ställer in Wide - 40MHz Channel (Bred - 40 MHz kanal) som bred kanal kommer den här inställningen att finnas tillgänglig för din primära Wireless-N-kanal. Välj kanal i listrutan. Standard Channel (Standardkanal). Välj kanal för Wireless-N-, Wireless-G- och Wireless-B-nätverket.
  • Page 96 Starta om eller sätt på datorerna så att routerns nya inställningar börjar gälla. Om du vill testa routerns inställningar startar du webbläsaren på någon av Adress datorerna. I fältet webbläsaren skriver du www.linksys.com/registration och trycker på Enter. Klart! Installationen av Wireless-N Gigabit-router med Storage Link är klar.
  • Page 97 Konfigurera trålös säkerhet Öppna routerns webbverktyg på det sätt som beskrivs i steg 2 och klicka på fliken Wireless (Trådlöst). Klicka på fliken Wireless Security (Trådlös säkerhet). Välj vilken säkerhetsmetod du vill använda: PSK/PSK2 Personal (PSK/PSK2 – privat), WEP , PSK/PSK2 Enterprise (PSK/ PSK2 –...
  • Page 98 Klart! Trådlös säkerhet har nu Linksys är ett registrerat varumärke eller ett konfigurerats på routern. varumärke som tillhör Cisco Systems, Inc. och/eller dess samarbetspartner i USA och i vissa andra länder. Copyright © 2007 Cisco Systems, Inc. Med ensamrätt. WRT350N-SE_V2-QIG-70117A JL...
  • Page 99 Wireless-N Gigabit Router with User Guide Storage Link WIRELESS WRT350N (EU/LA) Model No.
  • Page 100 Specifications are subject to change without notice. Linksys is a registered trademark or trademark of Cisco Systems, Inc. and/or its affiliates in the U.S. and certain other countries. Copyright © 2007 Cisco Systems, Inc. All rights reserved. Other brands and product names are trademarks or registered trademarks of their respective holders.

  • Page 101: Table Of Contents

    Wireless-N Gigabit Router with Storage Link Table of Contents Chapter 1: Introduction Welcome What’s in this User Guide? Chapter 2: Planning Your Wireless Network Network Topology Ad-Hoc versus Infrastructure Mode Network Layout Chapter 3: Getting to Know the Wireless-N Gigabit Router with Storage Link The Back Panel The Front Panel The Top Panel...
  • Page 102 Wireless-N Gigabit Router with Storage Link The Applications & Gaming Tab - Single Port Forwarding The Applications & Gaming Tab - Port Range Forwarding The Applications & Gaming Tab - Port Range Triggering The Applications & Gaming Tab - DMZ The Applications and Gaming Tab - QoS The Administration Tab - Management The Administration Tab - Log...
  • Page 103 Wireless-N Gigabit Router with Storage Link List of Figures Figure 3-1: The Router’s Back Panel Figure 3-2: The Router’s Front Panel Figure 3-3: The Router’s Top Panel Figure 4-1: Connect the USB Cable Figure 4-2: Connect the Internet Cable Figure 4-3: Connect the Ethernet Cable Figure 4-4: Connect the Power Figure 5-1: Router Login Figure 5-2: Setup Tab - Basic Setup (Automatic Configuration - DHCP)
  • Page 104 Wireless-N Gigabit Router with Storage Link Figure 5-25: VPN Passthrough Figure 5-26: Storage Tab - Disk Figure 5-27: Storage Tab - Claim Disk Figure 5-28: Storage Tab - Claimed Disk Figure 5-29: Storage Tab - Share Management Figure 5-30: Share Properties Figure 5-31: Storage Tab - Administration Figure 5-32: User Properties Figure 5-33: Group Properties...
  • Page 105 Wireless-N Gigabit Router with Storage Link Figure 5-59: Traceroute Test Figure 5-60: Administration Tab - Factory Defaults Figure 5-61: Administration Tab - Firmware Upgrade Figure 5-62: Status Tab - Router Figure 5-63: Status Tab - Local Network Figure 5-64: DHCP Client Table Figure 5-65: Status Tab - Wireless Network Figure C-1: Firmware Upgrade Figure E-1: IP Configuration Screen...

  • Page 106: Chapter 1: Introduction Welcome

    Wireless-N Gigabit Router with Storage Link Chapter 1: Introduction Welcome The Wireless-N Gigabit Router with Storage Link is really four devices in one box. First, there's the Wireless Access Point, which lets you connect to the network without wires. There's also a built-in 4-port full-duplex Gigabit Switch to connect your wired-Ethernet devices together.

  • Page 107: What's In This User Guide

    Wireless-N Gigabit Router with Storage Link What’s in this User Guide? This user guide covers the steps for setting up and using the Wireless-N Gigabit Router with Storage Link. • Chapter 1: Introduction This chapter describes the Router’s applications and this User Guide. •...
  • Page 108 Wireless-N Gigabit Router with Storage Link • Appendix G: Specifications This appendix provides the technical specifications for the Router. • Appendix H: Warranty Information This appendix supplies the warranty information for the Router. • Appendix I: Regulatory Information This appendix supplies the regulatory information regarding the Router. •...

  • Page 109: Chapter 2: Planning Your Wireless Network

    Wireless-N Gigabit Router with Storage Link Chapter 2: Planning Your Wireless Network Network Topology A wireless local area network (WLAN) is exactly like a regular local area network (LAN), except that each computer in the WLAN uses a wireless device to connect to the network. Computers in a WLAN share the same frequency channel and SSID, which is an identification name shared by the wireless devices belonging to the ssid (service set identifier): your wireless network’s name.

  • Page 110: Network Layout

    Wireless-N Gigabit Router with Storage Link Network Layout The Wireless-N Gigabit Router with Storage Link has been specifically designed for use with your Wireless-N, Wireless-G, and Wireless-B products. It will work with notebook adapters for your laptop computers, PCI adapters for your desktop computers, and USB adapters for your USB connectivity needs.

  • Page 111: Chapter 3: Getting To Know The Wireless-N Gigabit Router With Storage Link

    Wireless-N Gigabit Router with Storage Link Chapter 3: Getting to Know the Wireless-N Gigabit Router with Storage Link The Back Panel The Router's ports, where the cables are connected, and Reset button are located on the back panel. Figure 3-1: The Router’s Back Panel The USB port connects your Router to USB storage devices (flash drives, hard drives).

  • Page 112: The Front Panel

    Wireless-N Gigabit Router with Storage Link The Front Panel The Router’s LEDs are located on the front panel. Figure 3-2: The Router’s Front Panel POWER Green. The POWER LED lights up and will stay on while the Router is powered on. ETHERNET 1, 2, 3, 4 Green, Orange.

  • Page 113: Chapter 4: Connecting The Wireless-N Gigabit Router With Storage Link

    Wireless-N Gigabit Router with Storage Link Chapter 4: Connecting the Wireless-N Gigabit Router with Storage Link Hardware Installation 1. Make sure that all of your hardware is powered off, including the broadband modem and PCs. 2. Connect a USB cable to the Router’s USB port. Then, connect the other end of the USB cable to the USB hard disk.

  • Page 114: Chapter 5: Configuring The Wireless-N Gigabit Router With Storage Link

    Wireless-N Gigabit Router with Storage Link Chapter 5: Configuring the Wireless-N Gigabit Router with Storage Link Overview Linksys recommends using the Setup CD-ROM for first-time installation of the Router. If you do not wish to run the Setup Wizard on the Setup CD-ROM, then you can use the Web-based Utility to configure the Router. For advanced users, you may configure the Router’s advanced settings through the Web-based Utility.
  • Page 115 Wireless-N Gigabit Router with Storage Link Wireless • Basic Wireless Settings. Enter the basic settings for your wireless network on this screen. • Wireless Security. Enable and configure the security settings for your wireless network. • Wireless MAC Filter. Wireless access can be filtered by using the MAC addresses of the wireless devices transmitting within your network’s radius.

  • Page 116: How To Access The Web-Based Utility

    Wireless-N Gigabit Router with Storage Link • QoS. Quality of Service (QoS) ensures better service to high-priority types of network traffic. Administration • Management. On this screen, alter the Router’s password, access privileges, and UPnP settings. You can also use this screen to back up and restore the Router’s configuration file. •...

  • Page 117: Figure 5-3: Static Ip

    Wireless-N Gigabit Router with Storage Link Internet Setup The Internet Setup section configures the Router for your Internet connection type. This information can be obtained from your ISP. Internet Connection Type The Router supports six connection types: Automatic Configuration - DHCP, Static IP, PPPoE, PPTP, Telstra Cable, NOTE: Some of these connection types may not and L2TP.

  • Page 118: Figure 5-5: Pptp

    Wireless-N Gigabit Router with Storage Link Connect on Demand and Max Idle Time. You can configure the Router to cut the Internet connection after it has been inactive for a specific period of time (Max Idle Time). If your Internet connection has been terminated due to inactivity, Connect on Demand enables the Router to automatically re-establish your connection as soon as you attempt to access the Internet again.

  • Page 119: Figure 5-6: Telstra Cable

    Wireless-N Gigabit Router with Storage Link Telstra Cable Telstra Cable is a service used in Australia only. Check with your ISP for the necessary setup information. Server IP Address. This is the IP address that the Router has, when seen from the Internet. Your ISP will provide you with the IP address you need to specify here.
  • Page 120 Wireless-N Gigabit Router with Storage Link MTU. The MTU (Maximum Transmission Unit) setting specifies the largest packet size permitted for network packet: a unit of data sent over a network. transmission. To manually set a value, select Manual and enter the value desired in the Size field. You should leave this value in the 1200 to 1500 range.

  • Page 121: Figure 5-8: Dhcp Reservation

    Wireless-N Gigabit Router with Storage Link WINS. The Windows Internet Naming Service (WINS) converts NetBIOS names to IP addresses. If you use a WINS server, enter that server’s IP address here. Otherwise, leave this field blank. DHCP Reservation. Click the DHCP Reservation button if you want to assign a fixed local IP address to a MAC address.

  • Page 122: The Setup Tab - Ddns

    Wireless-N Gigabit Router with Storage Link The Setup Tab - DDNS The Router offers a Dynamic Domain Name System (DDNS) feature. DDNS lets you assign a fixed host and domain name to a dynamic Internet IP address. It is useful when you are hosting your own website, FTP server, or other server behind the Router.

  • Page 123: Figure 5-10: Ddns - Tzo.com

    Wireless-N Gigabit Router with Storage Link TZO.com E-mail Address, TZO Password, and Domain Name. Enter the settings of the account you set up with TZO. Internet IP Address. The Router’s Internet IP address is displayed here. Because it is dynamic, it will change. Status.

  • Page 124: The Setup Tab - Mac Address Clone

    Wireless-N Gigabit Router with Storage Link The Setup Tab - MAC Address Clone A MAC address is a 12-digit code assigned to a unique piece of hardware for identification, like a social security number. Some ISPs will require you to register a MAC address in order to access the Internet. If you do not wish to re-register the MAC address with your ISP, you may assign the MAC address you have currently registered with your ISP to the Router with the MAC Address Clone feature.

  • Page 125: The Setup Tab - Advanced Routing

    Wireless-N Gigabit Router with Storage Link The Setup Tab - Advanced Routing The Advanced Routing screen allows you to configure the dynamic and static routing settings. Advanced Routing If this Router is hosting your network’s connection to the Internet, select Enabled. If another Router exists on your network, select Disabled.

  • Page 126: Figure 5-13: Routing Table

    Wireless-N Gigabit Router with Storage Link Show Routing Table. Click the Show Routing Table button to open a screen displaying how data is routed through your local network. For each route, the Destination LAN IP address, Subnet Mask, Gateway, and Interface are displayed.

  • Page 127: The Wireless Tab - Basic Wireless Settings

    Wireless-N Gigabit Router with Storage Link The Wireless Tab - Basic Wireless Settings The basic settings for wireless networking are set on this screen. Basic Wireless Settings Network Mode. If you have wireless devices in your network, keep the default setting, Mixed. If you do not have any wireless devices in your network, select Disable.

  • Page 128: The Wireless Tab - Wireless Security

    Wireless-N Gigabit Router with Storage Link The Wireless Tab - Wireless Security These settings configure the security of your wireless network. There are six wireless security modes supported by the Router: PSK-Personal, PSK2-Personal, PSK-Enterprise, PSK2-Enterprise, RADIUS, and WEP. (PSK stands for Pre-Shared Key, which is stronger than WEP encryption.

  • Page 129: Figure 5-17: Wireless Security - Psk-Enterprise

    Wireless-N Gigabit Router with Storage Link PSK-Enterprise This option features PSK used in coordination with a RADIUS server. (This should only be used when a RADIUS server is connected to the Router.) Encryption. Select the algorithm(s) you want to use, TKIP or AES. (AES is a stronger encryption algorithm than TKIP.) RADIUS Server.

  • Page 130: Figure 5-19: Wireless Security - Radius

    Wireless-N Gigabit Router with Storage Link RADIUS This option features WEP used in coordination with a RADIUS server. (This should only be used when a RADIUS server is connected to the Router.) RADIUS Server. Enter the IP address of your RADIUS server. RADIUS Port.

  • Page 131: The Wireless Tab - Wireless Mac Filter

    Wireless-N Gigabit Router with Storage Link The Wireless Tab - Wireless MAC Filter Wireless access can be filtered by using the MAC addresses of the wireless devices transmitting within your network’s radius. Wireless MAC Filter To filter wireless users by MAC Address, either permitting or blocking access, click Enabled. If you do not wish to filter users by MAC Address, select Disabled.

  • Page 132: The Wireless Tab - Advanced Wireless Settings

    Wireless-N Gigabit Router with Storage Link The Wireless Tab - Advanced Wireless Settings This tab is used to set up the Router’s advanced wireless functions. These settings should only be adjusted by an expert administrator as incorrect settings can reduce wireless performance. Advanced Wireless AP Isolation.
  • Page 133 Wireless-N Gigabit Router with Storage Link boosts the Router’s ability to catch all Wireless-N and Wireless-G transmissions but will severely decrease performance. Beacon Interval. Enter a value between 20-1000 milliseconds. The Beacon Interval value indicates the frequency interval of the beacon. A beacon is a packet broadcast by the Router to synchronize the wireless network.

  • Page 134: The Security Tab - Firewall

    Wireless-N Gigabit Router with Storage Link The Security Tab - Firewall The Firewall screen offers a firewall and filters that block specific Internet data types. Firewall Firewall Protection. A firewall enhances network security and uses Stateful Packet Inspection (SPI) for more detailed review of data packets entering your network.

  • Page 135: The Security Tab - Vpn Passthrough

    Wireless-N Gigabit Router with Storage Link The Security Tab - VPN Passthrough The VPN Passthrough screen allows you to allow VPN tunnels using IPSec, L2TP, or PPTP protocols to pass through the Router. VPN Passthrough IPSec Passthrough. IPSec (Internet Protocol Security) is a suite of protocols used to implement secure exchange of packets at the IP layer.

  • Page 136: The Storage Tab - Disk

    Wireless-N Gigabit Router with Storage Link The Storage Tab - Disk You can attach a USB flash drive or hard disk to the Router. The Disk screen describes the disk currently attached to the Router. Using this screen, you can format a blank disk, safely remove a disk, or erase a disk. Disk Management Disk Detail If a blank disk is attached to the Router, the Disk, Make and Model, and Physical Size columns describe the disk.

  • Page 137: The Storage Tab - Share

    Wireless-N Gigabit Router with Storage Link The Storage Tab - Share Shares control access to the partition(s) of the disk attached to the Router. The Share screen describes the current shares. Using this screen, you can create new shares, modify share properties, or delete shares. Share Management Shares The Share Name, Partition, and Total Space columns describe the shares.

  • Page 138: The Storage Tab - Administration

    Wireless-N Gigabit Router with Storage Link The Storage Tab - Administration The Administration screen allows you to manage the users and groups of users that can access the shares. Basic Machine Name. Enter a name for the Router. Punctuation and other special characters (e.g., * / | \) cannot be used in the name.

  • Page 139: Figure 5-33: Group Properties

    Wireless-N Gigabit Router with Storage Link Settings button to save the changes, or click the Cancel Changes button to cancel the changes. Click the Close button to exit the Group Properties screen. Delete. Click the Delete button to remove a user. Create New Group.

  • Page 140: The Storage Tab - Media Server

    Wireless-N Gigabit Router with Storage Link The Storage Tab - Media Server The Router has a built-in UPnP AV media server, so it can stream music, pictures, or video from the USB hard disk to a UPnP-compatible media adapter. The Media Server screen lets you select shares to scan for content. UPnP Media Server Setup Server Name.

  • Page 141: The Storage Tab - Ftp Server

    Wireless-N Gigabit Router with Storage Link The Storage Tab - FTP Server Use the FTP Server screen to configure the Router as an FTP server for your local network. FTP Server Setup Server Name. The name of the Router is displayed here. FTP Server.

  • Page 142: The Access Restrictions Tab - Internet Access Policy

    Wireless-N Gigabit Router with Storage Link The Access Restrictions Tab - Internet Access Policy The Internet Access Policy screen allows you to block or allow specific kinds of Internet usage and traffic, such as Internet access, designated services, websites, and inbound traffic during specific days and times. Internet Access Policy Access Policy.

  • Page 143: Figure 5-42: List Of Pcs

    Wireless-N Gigabit Router with Storage Link 7. You can block websites with specific URL addresses. Enter each URL in a separate field next to Website Blocking by URL Address. 8. You can also block websites using specific keywords. Enter each keyword in a separate field next to Website Blocking by Keyword.

  • Page 144: The Applications & Gaming Tab - Single Port Forwarding

    Wireless-N Gigabit Router with Storage Link The Applications & Gaming Tab - Single Port Forwarding When you click the Applications & Gaming tab, you will see the Single Port Forwarding screen. You can customize port services for common applications on this screen. When users send these types of requests to your network via the Internet, the Router will forward those requests to the appropriate servers (computers).

  • Page 145: The Applications & Gaming Tab - Port Range Forwarding

    Wireless-N Gigabit Router with Storage Link The Applications & Gaming Tab - Port Range Forwarding Port range forwarding sets up public services on your network, such as web servers, ftp servers, e-mail servers, or other specialized Internet applications. (Specialized Internet applications are any applications that use Internet access to perform functions such as videoconferencing or online gaming.

  • Page 146: The Applications & Gaming Tab - Port Range Triggering

    Wireless-N Gigabit Router with Storage Link The Applications & Gaming Tab - Port Range Triggering This screen instructs the Router to watch outgoing data for specific port numbers. The IP address of the computer that sends the matching data is remembered by the Router, so that when the requested data returns through the Router, the data is sent to the proper computer by way of IP address and port mapping rules.

  • Page 147: The Applications & Gaming Tab - Dmz

    Wireless-N Gigabit Router with Storage Link The Applications & Gaming Tab - DMZ The DMZ screen allows one local user to be exposed to the Internet for use of a special-purpose service such as Internet gaming and videoconferencing. DMZ hosting forwards all the ports at the same time to one PC. The Port Range Forwarding is more secure because it only opens the ports you want to have opened, while DMZ hosting opens all the ports of one computer, exposing the computer to the Internet.

  • Page 148: The Applications And Gaming Tab - Qos

    Wireless-N Gigabit Router with Storage Link The Applications and Gaming Tab - QoS Quality of Service (QoS) ensures better service to high-priority types of network traffic, which may involve demanding, real-time applications, such as videoconferencing. QoS (Quality of Service) Wireless The Router features Wireless QoS.

  • Page 149: Figure 5-49: Qos - Applications (Add A New Application)

    Wireless-N Gigabit Router with Storage Link Add a New Application Enter a Name Enter any name to indicate the name of the entry. Port Range Enter the port range that the application will be using. For example, if you want to allocate bandwidth for FTP, you can enter 21-21.

  • Page 150: Figure 5-53: Qos - Voice Device

    Wireless-N Gigabit Router with Storage Link Voice Device Enter a Name. Enter a name for your voice device. MAC Address. Enter the MAC address of your voice device. Figure 5-53: QoS - Voice Device Priority. Select the appropriate priority: High, Medium, Normal, or Low. Click the Add button to save your changes.

  • Page 151: The Administration Tab - Management

    Wireless-N Gigabit Router with Storage Link The Administration Tab - Management When you click the Administration tab, you will see the Management screen. This screen allows you to change the Router’s access settings and configure the UPnP (Universal Plug and Play) features. You can also back up and restore the Router’s configuration file.
  • Page 152 Wireless-N Gigabit Router with Storage Link Allowed Remote IP Address. If you want to be able to access the Router from any external IP address, select Any IP Address. If you want to specify an external IP address or range of IP addresses, then select the second option and complete the fields provided.

  • Page 153: The Administration Tab - Log

    Wireless-N Gigabit Router with Storage Link The Administration Tab - Log When you click the Administration tab, you will see the Log screen. It provides you with a log of all incoming and outgoing URLs or IP addresses for your Internet connection. Log.

  • Page 154: The Administration Tab - Diagnostics

    Wireless-N Gigabit Router with Storage Link The Administration Tab - Diagnostics The diagnostic tests (Ping and Traceroute) allow you to check the connections of your network devices, including the connection to the Internet. Ping Test. The Ping test will check the status of a connection. Enter the IP address or URL of the PC whose connection you wish to test, the packet size (default is 32 bytes), and how many times you wish to test it.

  • Page 155: The Administration Tab - Factory Defaults

    Wireless-N Gigabit Router with Storage Link The Administration Tab - Factory Defaults The Factory Defaults screen allows you to restore the Router’s configuration to its factory default settings. NOTE: Do not restore the factory defaults unless you are having difficulties with the Router and have exhausted all other troubleshooting measures.

  • Page 156: The Administration Tab - Firmware Upgrade

    Wireless-N Gigabit Router with Storage Link The Administration Tab - Firmware Upgrade The Firmware Upgrade screen allows you to upgrade the Router’s firmware. Do not upgrade the firmware unless you are experiencing problems with the Router or the new firmware has a feature you want to use. Before upgrading the firmware, download the Router’s firmware upgrade file from the Linksys website, www.linksys.com/international.

  • Page 157: The Status Tab - Router

    Wireless-N Gigabit Router with Storage Link The Status Tab - Router The Router screen displays information about the Router and its current settings. The on-screen information will vary depending on the Internet Connection Type selected on the Setup screen. Router Information Firmware Version.

  • Page 158: The Status Tab - Local Network

    Wireless-N Gigabit Router with Storage Link The Status Tab - Local Network The Local Network screen displays information about the local network. Local Network MAC Address. The MAC Address of the Router’s local interface is displayed here. Router IP Address. This shows the Router’s IP address, as it appears on your local network. Subnet Mask.

  • Page 159: Figure 5-65: Status Tab - Wireless Network

    Wireless-N Gigabit Router with Storage Link The Status Tab - Wireless The Wireless screen displays the status information of your wireless network. Wireless MAC Address. The MAC Address of the Router’s wireless interface is displayed here. Mode. Displayed here is the wireless mode (Mixed, Wireless-N Only, Wireless-G Only, Wireless-B Only, or Disabled) used by the network.

  • Page 160: Appendix A: Troubleshooting

    Wireless-N Gigabit Router with Storage Link Appendix A: Troubleshooting This appendix consists of two parts: “Common Problems and Solutions” and “Frequently Asked Questions.” Provided are possible solutions to problems that may occur during the installation and operation of the Router. Read the descriptions below to help you solve your problems.
  • Page 161 Wireless-N Gigabit Router with Storage Link • For Windows 2000: 1. Click Start, Settings, and Control Panel. Double-click Network and Dial-Up Connections. 2. Right-click the Local Area Connection that is associated with the Ethernet adapter you are using, and select the Properties option. 3.
  • Page 162 Wireless-N Gigabit Router with Storage Link B Open a command prompt. For Windows 98SE and Me: • Click Start and Run. In the Open field, type command. Press the Enter key or click the OK button. For Windows 2000 and XP: •...
  • Page 163 Wireless-N Gigabit Router with Storage Link 5. I am not able to access the Setup page of the Router’s web-based utility. • Refer to “Problem #3, I want to test my Internet connection” to verify that your computer is properly connected to the Router.
  • Page 164 Wireless-N Gigabit Router with Storage Link 7. I need to set up online game hosting or use other Internet applications. If you want to play online games or use Internet applications, most will work without doing any port forwarding or DMZ hosting. There may be cases when you want to host an online game or Internet application.
  • Page 165 Wireless-N Gigabit Router with Storage Link Follow these steps to set DMZ hosting: 1. Access the Router’s web-based utility by going to http://192.168.1.1 or the IP address of the Router. Go to the Applications & Gaming => Port Range Forwarding tab. 2.
  • Page 166 Wireless-N Gigabit Router with Storage Link 11. To start over, I need to set the Router to factory defaults. Hold the Reset button for five seconds and then release it. This will return the password, forwarding, and other settings on the Router to the factory default settings. In other words, the Router will revert to its original factory configuration.
  • Page 167 Wireless-N Gigabit Router with Storage Link 15. I can’t access my e-mail, web or I am getting corrupted data from the Internet. The Maximum Transmission Unit (MTU) setting may need to be adjusted. By default, the MTU is set at 1500. For most DSL users, it is strongly recommended to use MTU 1492.
  • Page 168 Wireless-N Gigabit Router with Storage Link Frequently Asked Questions What is the maximum number of IP addresses that the Router will support? The Router will support up to 253 IP addresses. Is IPSec Pass-Through supported by the Router? Yes, it is a built-in feature that the Router automatically enables. Where is the Router installed on the network? In a typical environment, the Router is installed between the cable/DSL modem and the LAN.
  • Page 169 Wireless-N Gigabit Router with Storage Link I set up an Unreal Tournament Server, but others on the LAN cannot join. What do I need to do? If you have a dedicated Unreal Tournament server running, you need to create a static IP for each of the LAN computers and forward ports 7777, 7778, 7779, 7780, 7781, and 27900 to the IP address of the server.
  • Page 170 Wireless-N Gigabit Router with Storage Link more current version of Router firmware will not enhance the quality or speed of your Internet connection, and may disrupt your current connection stability. Will the Router function in a Macintosh environment? Yes, but the Router’s setup pages are accessible only through Internet Explorer 4.0 or Netscape Navigator 4.0 or higher for Macintosh.
  • Page 171 Wireless-N Gigabit Router with Storage Link Can the Router act as my DHCP server? Yes. The Router has DHCP server software built-in. Can I run an application from a remote computer over the wireless network? This will depend on whether or not the application is designed to be used over a network. Consult the application’s documentation to determine if it supports operation over a network.
  • Page 172 Wireless-N Gigabit Router with Storage Link What is infrastructure mode? When a wireless network is set to infrastructure mode, the wireless network is configured to communicate with a wired network through a wireless access point. What is roaming? Roaming is the ability of a portable computer to communicate continuously while the user and computer are moving freely throughout an area greater than that covered by a single access point.
  • Page 173 Wireless-N Gigabit Router with Storage Link What is DSSS? What is FHSS? And what are their differences? Frequency-Hopping Spread-Spectrum (FHSS) uses a narrowband carrier that changes frequency in a pattern that is known to both transmitter and receiver. Properly synchronized, the net effect is to maintain a single logical channel.

  • Page 174: Appendix B: Wireless Security

    Wireless-N Gigabit Router with Storage Link Appendix B: Wireless Security Linksys wants to make wireless networking as safe and easy for you as possible. The current generation of Linksys products provide several network security features, but they require specific action on your part for implementation.
  • Page 175 Wireless-N Gigabit Router with Storage Link SSID. There are several things to keep in mind about the SSID: 1. Disable Broadcast 2. Make it unique 3. Change it often Most wireless networking devices will give you the option of broadcasting the SSID. While this option may be more convenient, it allows anyone to log into your wireless network.
  • Page 176 Wireless-N Gigabit Router with Storage Link PSK/PSK2-Personal. Select the type of algorithm, TKIP or AES, and enter a password in the Pre-shared Key field of 8-63 characters. Enter a Key Renewal period time between 0 and 99,999 seconds, which instructs the Router or other device how often it should change the encryption keys.

  • Page 177: Appendix C: Upgrading Firmware

    Wireless-N Gigabit Router with Storage Link Appendix C: Upgrading Firmware The Router's firmware is upgraded through the Web-based Utility's Administration tab. Follow these instructions: 1. Download the firmware from Linksys's website at www.linksys.com/international. 2. Extract the firmware file on your computer. 3.

  • Page 178: Appendix D: Windows Help

    Wireless-N Gigabit Router with Storage Link Appendix D: Windows Help Almost all Linksys wireless products require Microsoft Windows. Windows is the most used operating system in the world and comes with many features that help make networking easier. These features can be accessed through Windows Help and are described in this appendix.

  • Page 179: Appendix E: Finding The Mac Address And Ip Address For Your Ethernet Adapter

    Wireless-N Gigabit Router with Storage Link Appendix E: Finding the MAC Address and IP Address for your Ethernet Adapter This section describes how to find the MAC address for your computer’s Ethernet adapter so you can use the MAC filtering and/or MAC address cloning feature of the Router. You can also find the IP address of your computer’s Ethernet adapter.

  • Page 180: Windows 2000 Or Xp Instructions

    Wireless-N Gigabit Router with Storage Link Windows 2000 or XP Instructions 1. Click Start and Run. In the Open field, enter cmd. Press the Enter key or click the OK button. 2. At the command prompt, enter ipconfig /all. Then press the Enter key. 3.

  • Page 181: Appendix F: Glossary

    Wireless-N Gigabit Router with Storage Link Appendix F: Glossary This glossary contains some basic networking terms you may come across when using this product. For more advanced terms, see the complete Linksys glossary at http://www.linksys.com/glossary. Access Point - A device that allows wireless-equipped computers and other devices to communicate with a wired network.
  • Page 182 Wireless-N Gigabit Router with Storage Link DMZ (Demilitarized Zone) - Removes the Router's firewall protection from one PC, allowing it to be “seen” from the Internet. DNS (Domain Name Server) - The IP address of your ISP's server, which translates the names of websites into IP addresses.
  • Page 183 Wireless-N Gigabit Router with Storage Link IP Address - The address used to identify a computer or device on a network. IPCONFIG - A Windows 2000 and XP utility that displays the IP address for a particular networking device. IPSec (Internet Protocol Security) - A VPN protocol used to implement secure exchange of packets at the IP layer. ISP (Internet Service Provider) - A company that provides access to the Internet.
  • Page 184 Wireless-N Gigabit Router with Storage Link RJ-45 (Registered Jack-45) - An Ethernet connector that holds up to eight wires. Roaming - The ability to take a wireless device from one access point's range to another without losing the connection. Router - A networking device that connects multiple networks together. Server - Any computer whose function in a network is to provide user access to files, printing, communications, and other services.
  • Page 185 Wireless-N Gigabit Router with Storage Link TKIP (Temporal Key Integrity Protocol) - a wireless encryption protocol that provides dynamic encryption keys for each packet transmitted. Topology - The physical layout of a network. TX Rate - Transmission Rate. Upgrade - To replace existing software or firmware with a newer version. Upload - To transmit a file over a network.

  • Page 186: Appendix G: Specifications

    Wireless-N Gigabit Router with Storage Link Appendix G: Specifications Model WRT350N Standards Draft 802.11n, 802.11g, 802.11b, 802.3, 802.3u, 802.3x, 802.3ab, USB 2.0 Ports Power, Internet, Ethernet, USB Button Reset Cabling Type CAT 5e, USB 2.0 LEDs Power, Ethernet(1-4), Internet, USB, Wireless, Security # of Antennas RF Pwr (EIRP) in dBm 17 dBm...
  • Page 187 Wireless-N Gigabit Router with Storage Link Operating Temp. 0° C to 40° C Storage Temp. -20° C to 60° C Operating Humidity 10% to 85%, Non-Condensing Storage Humidity 5% to 90% Non-Condensing Appendix G: Specifications...

  • Page 188: Appendix H: Warranty Information

    Wireless-N Gigabit Router with Storage Link Appendix H: Warranty Information Linksys warrants to You that, for a period of three years (the “Warranty Period”), your Linksys Product will be substantially free of defects in materials and workmanship under normal use. Your exclusive remedy and Linksys' entire liability under this warranty will be for Linksys at its option to repair or replace the Product or refund Your purchase price less any rebates.

  • Page 189: Appendix I: Regulatory Information

    Wireless-N Gigabit Router with Storage Link Appendix I: Regulatory Information FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
  • Page 190 Wireless-N Gigabit Router with Storage Link Industry Canada Statement This device complies with Industry Canada ICES-003 and RSS210 rules. Déclaration d’Industrie Canada Cet appareil est conforme aux normes NMB003 et RSS210 d'Industrie Canada. Industry Canada Statement Operation is subject to the following two conditions: 1.
  • Page 191 Wireless-N Gigabit Router with Storage Link Compliance Information for 2,4-GHz and 5-GHz Wireless Products Relevant to the EU and Other Countries Following the EU Directive 1999/5/EC (R&TTE Directive) Declaration of Conformity with Regard to the EU Directive 1999/5/EC (R&TTE Directive) Appendix I: Regulatory Information...
  • Page 192 Wireless-N Gigabit Router with Storage Link NOTE: For all products, the Declaration of Conformity (DofC) is available through one or more of these options: • A pdf file is included on the product's CD. • A print copy is included with the product. •...
  • Page 193 Wireless-N Gigabit Router with Storage Link National Restrictions This product may be used in all EU countries (and other countries following the EU directive 1999/5/EC) without any limitation except for the countries mentioned below: Ce produit peut être utilisé dans tous les pays de l’UE (et dans tous les pays ayant transposés la directive 1999/5/CE) sans aucune limitation, excepté...
  • Page 194 Wireless-N Gigabit Router with Storage Link The following countries have restrictions and/or requirements in addition to those given in Table 1: Denmark In Denmark, the band 5150 - 5350 MHz is also allowed for outdoor usage. I Danmark må frekvensbåndet 5150 - 5350 også anvendes udendørs. France For 2,4 GHz, the output power is restricted to 10 mW eirp when the product is used outdoors in the band 2454 - 2483,5 MHz.
  • Page 195 Wireless-N Gigabit Router with Storage Link Latvia The outdoor usage of the 2,4 GHz band requires an authorization from the Electronic Communications Office. Please check http://www.esd.lv for more details. Notes: (1) Although Norway, Switzerland and Liechtenstein are not EU member states, the EU Directive 1999/5/EC has also been implemented in those countries.
  • Page 196 Wireless-N Gigabit Router with Storage Link Wireless Adapters For wireless adapters operating in the 2,4-GHz band, the typical radiated output power is 18 dBm EIRP, while the maximum radiated output power will not exceed 20 dBm (100 mW) EIRP. For wireless adapters operating in the 5-GHz band, the typical radiated output power is 20 dBm EIRP, while the maximum radiated output power will not exceed 23 dBm (200 mW) EIRP.
  • Page 197 Wireless-N Gigabit Router with Storage Link Wireless Access Points, Routers, or Other Wireless Products If you have a different wireless product, use its Web-based Utility to configure its power output setting (refer to the product’s documentation for more information). Technical Documents on www.linksys.com/international Follow these steps to access technical documents: 1.
  • Page 198 Wireless-N Gigabit Router with Storage Link User Information for Consumer Products Covered by EU Directive 2002/96/EC on Waste Electric and Electronic Equipment (WEEE) This document contains important information for users with regards to the proper disposal and recycling of Linksys products.
  • Page 199 Wireless-N Gigabit Router with Storage Link Appendix I: Regulatory Information...
  • Page 200 Wireless-N Gigabit Router with Storage Link Appendix I: Regulatory Information...
  • Page 201 Wireless-N Gigabit Router with Storage Link Appendix I: Regulatory Information...
  • Page 202 Wireless-N Gigabit Router with Storage Link For more information, visit www.linksys.com. Appendix I: Regulatory Information...

  • Page 203: Appendix J: Contact Information

    Wireless-N Gigabit Router with Storage Link Appendix J: Contact Information Need to contact Linksys? Visit us online for information on the latest products and updates to your existing products at: http://www.linksys.com/international If you experience problems with any Linksys product, you can e-mail us at: In Europe E-mail Address Austria...
  • Page 204 Wireless-N Gigabit Router with Storage Link In Europe E-mail Address Switzerland support.ch@linksys.com Turkey support.tk@linksys.com United Kingdom support.uk@linksys.com Outside of Europe E-mail Address Asia Pacific asiasupport@linksys.com (English only) Latin America support.portuguese@linksys.com or support.spanish@linksys.com Middle East & Africa support.mea@linksys.com (English only) South Africa support.ze@linksys.com (English only) support.ae@linksys.com (English only) U.S.

Table of Contents