Cisco WRP500 Administration Manual page 51

Appendix A Advanced Voice Fields
R E V I E W D R A F T # 1 — C I S C O C O N F I D E N T I A L
DTMF Relay MIME
Type
Remove Last Reg
Use Compact Header
Escape Display Name Lets you keep the Display Name private. Select yes if you want the
RFC 2543 Call Hold
Mark All AVT Packets If set to yes, all AVT tone packets (encoded for redundancy) have
SIP TCP Port Min
SIP TCP Port Max
MIME Type used in a SIP INFO message to signal a DTMF event.
The default is application/dtmf-relay.
Lets you remove the last registration before registering a new one if
the value is different. Select yes or no from the drop-down menu.
The default is no.
Lets you use compact SIP headers in outbound SIP messages.
Select yes or no from the drop-down menu. If set to yes, the
WRP500 uses compact SIP headers in outbound SIP messages. If
set to no, the WRP500 uses normal SIP headers. If inbound SIP
requests contain compact headers, the WRP500 reuses the same
compact headers when generating the response regardless the
settings of the Use Compact Header parameter. If inbound SIP
requests contain normal headers, the WRP500 substitutes those
headers with compact headers (if defined by RFC 261) if Use
Compact Header parameter is set to yes.
The default is no.
WRP500 to enclose the string (configured in the Display Name) in
a pair of double quotes for outbound SIP messages. Any
occurrences of or \ in the string is escaped with \ and \\ inside the
pair of double quotes. Otherwise, select no.
The default is no.
Configures the type of call hold: a:sendonly or 0.0.0.0.
The default is no; do not use the 0.0.0.0 syntax in a HOLD SDP; use
the a:sendonly syntax.
the marker bit set. If set to no, only the first packet has the marker
bit set for each DTMF event.
The default is yes.
Specifies the lowest TCP port number that can be used for SIP
sessions.
Specifies the highest TCP port number that can be used for SIP
sessions.
Cisco WRP500 Administration Guide
SIP page
A-7