Appendix A
Advanced Voice Fields
R E V I E W D R A F T # 1 — C I S C O C O N F I D E N T I A L
Voice tab > User page >
Distinctive Ring Settings section
Caller number patterns are matched from Ring 1 to Ring 8. The first match (not the closest match)
will be used for alerting the subscriber.
Ring1 - 9 Caller
Voice tab > User page >
Ring Settings section
Default Ring
Default CWT
Hold Reminder Ring
Call Back Ring
Cfwd Ring Splash Len Duration of ring splash when a call is forwarded
Cblk Ring Splash Len Duration of ring splash when a call is blocked (0 – 10.0s).
VMWI Ring Splash
Len
Caller number pattern to play Distinctive Ring/CWT 1, 2, 3, 4, 5, 6,
7, 8, or 9.
The default is blank.
Default ringing pattern, 1 – 8, for all callers.
The default is 1.
Default CWT pattern, 1 – 8, for all callers.
The default is 2.
Ring pattern for reminder of a holding call when the phone is
on-hook.
The default is None.
Ring pattern for call back notification.
The default is None.
(0 – 10.0s).
The default is 0.
The default is 0.
Duration of ring splash when new messages arrive before the
VMWI signal is applied (0 – 10.0s).
The default is .5.
Cisco WRP500 Administration Guide
User page
A-45