Cisco WRP500 Administration Manual page 94

Setup
R E V I E W D R A F T # 1 — C I S C O C O N F I D E N T I A L
Cisco WRP500 Administration Guide
B-4
L2TP:
• Server IP Address: The IP address of your service
provider server.
• User Name: The user name for your account with
your service provider.
• Password: The password for your account with
your service provider.
• Connect on Demand: For a PPPoE, PPTP, L2TP, or
Telstra Cable connection type, a feature that allows
your WRP500 to re-establish a terminated
connection when a user attempts to access the
Internet.
• Max Idle Time: When Connection on Demand is
enabled, use the Max Idle Time field to specify the
period of inactivity that causes a connection to
terminate.
Default: 5 minutes
• Keep Alive: a feature that allows your WRP500 to
check your Internet connection at a specified
interval (Redial Period). If you are disconnected,
then the WRP500 automatically re-establishes your
connection.
• Redial Period: When Keep Alive is enabled, this
period is the interval in seconds at which the
Internet connection is checked.
Default: 30 seconds
Appendix B Data Fields