Cisco WRP500 Administration Manual page 66

Regional page
R E V I E W D R A F T # 1 — C I S C O C O N F I D E N T I A L
Accept Last Act Code Accepts the last outbound call. It lets the call ring through when do
Accept Last Deact
Code
CW Act Code
CW Deact Code
CW Per Call Act Code Enables call waiting for the next call.
CW Per Call Deact
Code
Block CID Act Code
Block CID Deact
Code
Block CID Per Call
Act Code
Block CID Per Call
Deact Code
Block ANC Act Code Blocks all anonymous calls.
Block ANC Deact
Code
DND Act Code
DND Deact Code
CID Act Code
Cisco WRP500 Administration Guide
A-22
not disturb or call forwarding of all calls are enabled.
The default is *64.
Cancels the code to accept the last outbound call.
The default is *84.
Enables call waiting on all calls.
The default is *56.
Disables call waiting on all calls.
The default is *57.
The default is *71.
Disables call waiting for the next call.
The default is *70.
Blocks caller ID on all outbound calls.
The default is *67.
Removes caller ID blocking on all outbound calls.
The default is *68.
Blocks caller ID on the next outbound call.
The default is *81.
Removes caller ID blocking on the next inbound call.
The default is *82.
The default is *77.
Removes blocking of all anonymous calls.
The default is *87.
Enables the do not disturb feature.
The default is *78.
Disables the do not disturb feature.
The default is *79.
Enables caller ID generation.
The default is *65.
Appendix A Advanced Voice Fields