Cisco WRP500 Administration Manual page 95

Appendix B Data Fields
R E V I E W D R A F T # 1 — C I S C O C O N F I D E N T I A L
Host Name
Domain Name
MTU
Telstra Cable:
• User Name: The user name for your account with
your service provider.
• Password: The password for your account with
your service provider.
• Connect on Demand: For a PPPoE, PPTP, L2TP, or
Telstra Cable connection type, a feature that allows
your WRP500 to re-establish a terminated
connection when a user attempts to access the
Internet.
• Max Idle Time: When Connection on Demand is
enabled, use the Max Idle Time field to specify the
period of inactivity that causes a connection to
terminate.
Default: 5 minutes
• Keep Alive: a feature that allows your WRP500 to
check your Internet connection at a specified
interval (Redial Period). If you are disconnected,
then the WRP500 automatically re-establishes your
connection.
• Redial Period: When Keep Alive is enabled, this
period is the interval in seconds at which the
Internet connection is checked.
Default: 30 seconds
• Heart Beat Server: The IP address of the Heart Beat
Server.
A host name for the WRP500. Some service providers,
usually cable service providers, require a host name and a
domain name as identification. In most cases, these fields
can be left blank.
A domain name for the WRP500. Some service providers,
usually cable service providers, require a host name and a
domain name as identification. In most cases, these fields
can be left blank.
Maximum Transmission Unit. The largest packet size that
is permitted for Internet transmission. Select Manual if you
want to manually enter the largest packet size that is
transmitted. To have the WRP500 select the best MTU for
your Internet connection, keep the default setting, Auto.
Cisco WRP500 Administration Guide
Setup
B-5