Table of Contents
Advertisement
CA Series PC/104
Driver Setup
The following instructions are not intended to illustrate every function of the setup program. For more detailed
information, please refer to the help files by pressing F1 in the setup program.
1. Run the setup program BIN\SETUP.EXE.
2. Select your CB Series model and press Enter.
3. A window will open, displaying all configuration information for all installed modules. Press PgDn to view
advanced port setup options and to make configuration changes. Your module's configuration will be displayed
along with other settings such as port number, buffer size, etc.
4. Verify the settings and make any necessary changes.
Port number:
TxD buffer size:
RxD buffer size:
F5: Group Edit:
This is the port ID of each port. Application software will refer to a port by its port
number (ID). Port numbers must be unique; duplicate port numbers are not allowed.
The port ID can range from 0 to 127 as long as it does not overlap with another port.
Generally, you should consider the convenience of programming when specifying the
port number.
This is the transmission (output) buffer allocated in the system for each port.
This is the receiving (input) buffer allocated in the system for each port.
This allows you to configure several ports simultaneously as a group.
3-21
Software Installation
Advertisement
Table of Contents
