CA Series PC/104
Updating the Driver
1. In Windows Control Panel, open the Network applet. Under the Adapters tab, UPCI boards will appear as
a type of Moxa adapter (MOXA Smartio/Industio Family Adapter in this example). Select the Moxa adapter
and click Remove.
2. Restart the system.
3. Go through the process of installing the drivers, using the new drivers.
Removing the Driver
1. In the Windows Control Panel, open the Network applet. Under the Adapters tab, UPCI boards will
appear as a type of Moxa adapter (MOXA Smartio/Industio Family Adapter in this example). Select the
Moxa adapter and click Remove.
2. Click OK to exit the Network applet and restart the system.
3-28
Software Installation