Moxa Technologies CA Series User Manual page 51

CA Series PC/104 Software Installation
3. After the driver has been removed, click OK to return to the Add/Remove Programs applet.
Windows CE 5.0
In this section, we explain how to install Moxa CB series boards under WinCE 5.0. These instructions are
intended for users who are familiar with the Windows CE Platform Builder 5.0 Toolkit, and would like to install
one or more Moxa Tech products. Here, we only give the step-by-step installation instructions for the
development environment. You will need to download the image file to the target host yourself.
The WinCE 5.0 driver for the Moxa CB Series PC/104-Plus Multiport Serial Module supports the following
products:
CB Series: CB-108, CB-114, CB-134I
The CB-114 board is used to illustrate the installation procedure.
Installing the driver
The following procedure explains how to install the CB-114 multiport serial module driver under WinCE.
1. Obtain a copy of Moxa Tech WinCE 5.0 driver package and extract it to your computer. Double-click the
Install package to copy the Mxser folder to %WINCEROOT%\PLATFORM\ automatically, and import the
supported MOXA Tech products into the Folder.
2. Start WinCE Platform Builder, select File, and open New Platform.
3-37