Table of Contents
Advertisement
CA Series PC/104
Installing the Driver
In this section, we will describe how to install the CA or CB boards for the first time with Windows 7.
First, make sure that you have already plugged the board or boards into the system's PC/104 or PC/104-Plus
slot(s).
NOTE
If you have already installed Moxa CA or CB board(s) in your computer, and you are installing additional
boards, Windows 7 will automatically detect and install the new board(s) the next time you boot up the
computer. In this case, proceed directly to the next section, "Configuring the Ports," to configure the ports'
serial transmission parameters.
Second, download the drivers at www.moxa.com. Based on the OS type, choose the corresponding driver.
Then, follow the following procedures to install the driver.
1. The Setup Wizard will open. Click Next to install the driver.
2. Please read the license agreement. If you agree, click Next to move on.
3-44
Software Installation
Advertisement
Table of Contents
