Table of Contents
Advertisement
CA Series PC/104
Software Installation
5. A confirmation dialog will appear. Click Yes to remove the driver.
6. After the driver has been removed, click OK to close the window.
Windows CE 5.0
In this section, we explain how to install Moxa CA series boards under WinCE 5.0. These instructions are
intended for users who are familiar with the Windows CE Platform Builder 5.0 ToolKit, and who would like to
install one or more Moxa Tech products. Here, we only give the step-by-step installation instructions for the
development environment. You will need to download the image file to the target host yourself.
The WinCE 5.0 driver for the Moxa CA Series PC/104 Multiport Serial Module supports the following products:
CA Series: CA-108, CA-114, CA-134I, CA-104, CA-132, and CA-132I.
In the the following steps, we are using CA-104 as an example.
Installing the driver
The following procedure explains how to install the CA-104 multiport serial module driver under WinCE.
1. Obtain a copy of the Moxa Tech WinCE 5.0 driver package and extract it to your computer. Double-click the
Installation icon to copy the Mxpcdrv folder to %WINCEROOT%\PLATFORM\ automatically, and import the
supported Moxa Tech products into the Folder.
2. Start WinCE Platform Builder, and then select File New Platform.
3-14
Advertisement
Table of Contents
