Newer Os For Both Ca/Cb Series - Moxa Technologies CA Series User Manual

CA Series PC/104
7. Finally, open Build OS, select Build and Sysgen, and be sure to click Copy Files to Release Directory
After Build and Make Run-Time Image After Build.
8. Finally, copy your image file to the target host.
NOTE If you have created a Windows CE Platform Builder in the development environment, skip steps 2, 3, and 4..

Newer OS for Both CA/CB Series

The content below will describe the software installation for newer Windows OS, including Windows
2000/XP/2003/Vista/2008/7/8/8.1/10 (x86/x64), Windows Server 2008 R2/2012/2012 R2/2016 (x64)
The following topics include
Installing the Driver

Configuring the Ports

Checking the Status

Removing the Driver

Uninstallation the Driver

We will take Window 7 (x64) for example, to let you know how to install your CA or CB boards. The installation
procedure of Windows7 is similar to the other Windows platforms. The content describes how to install,
configure, check the port status, remove, or uninstall the CA or CB boards.
NOTE In the installation section, the CA Series has more installation procedures as it follows the ISA standard. The
content will be added, followed by the installation part of CB Series.
3-43
Software Installation