Table of Contents
Advertisement
CA Series PC/104
Software Installation
Driver Setup
The following instructions are not intended to illustrate every function of the setup program. For more detailed
information, please refer to the help files by pressing F1 in the setup program.
1. Run the setup program BIN\SETUP.EXE.
2. Select your CA Series model and press Enter.
3. You must set the Port No., I/O Address, IRQ, and INT Vector properly. These settings must match your
module's hardware configuration.
4. Press PgDn to view advanced the port setup options. Your module's configuration will be displayed along
with other settings, such as port number, buffer size, etc.
3-3
Advertisement
Table of Contents
