Table of Contents
Advertisement
CA Series PC/104
Loading the Driver
After setting up the driver, you must load the driver in order to gain access to the serial ports on the module.
Run BIN\DPC-DRV.EXE at the DOS prompt. The driver will detect your CA Series module automatically. You
should see messages indicating successful detection of your module, such as the following:
PC/104 Communication Module DOS driver Version 1.0
Setup driver ...
CA-104 series OK!
Device driver setup O.K.
At this point, you can execute applications that support API-232 functions, or start developing applications
using the API-232 library.
Unloading the Driver
To unload or release the CA Series driver from memory, enter DPC-DRV/Q at the DOS prompt.
Windows NT
The Windows NT drivers conform to the Win32 COMM API standard and support the CA-104, CA-104-T, CA-132,
CA-132-T, CA-132I, CA-132I-T. CA-108, CA-114, and CA-134I.
In the following instructions, the CA-104 is used as an example.
Installing the Driver
1. Right-click Network Neighborhood and select Properties in the context menu.
2. Under the Adapters tab, click Add....
3-5
Software Installation
Advertisement
Table of Contents
