Displaying A Window Group - Siemens SIMATIC PCS 7 OSx Operator's Manual

Displaying a
Window Group
SIMATIC PCS 7 OSx 4.1.2 Operator
In working with OSx, an operator may use certain groups of graphic
windows over and over. For example, a particular graphic may be frequently
displayed with an associated tag detail and real-time trend. Or two different
trends may need to be monitored at the same time.
Rather than call up each graphic window and reposition it separately every
time, a combination of graphic windows can be configured in a window
group. The operator can then access this entire window group as if it were a
single graphic window.
To display a configured window group, follow the steps below:
1. Be sure OSx is in the Operate state.
2. Click on the Directory icon in the navigation area at the bottom of the
screen. A list of OSx display types appears.
3. Click on
Window Group
window groups that are configured appears
4. Click on the name of the window group that you want to display. The
window group appears exactly as it was configured.
Figure 1-24 Displaying a Window Group
in the list of display types. A list of all the
(Figure 1-24).
1-55
OSx Station Basics