Equipment; Modes Of Operation; Manual Mode - Newport LDS1000 User Manual

LDS1000
EDH0170FE1010 – 09/98
2.1

Equipment

The LDS1000 electronic controller is delivered with:
• A RS-232-C lead.
• The present user's manual.
• The LDS-TOOLS Software.
• A connection cable (5 or 10 meters, depending on the order).
• As well as the extra accessories and options that may be ordered.
The sensor is delivered in a protection case which contains:
• The optical head.
• The control certificate.
• The present user's manual.
2.2

Modes of Operation

2.2.1

Manual Mode

The LDS1000 Controller displays angular rotation values of the mirror on a
frontal display screen. The operator uses the display and the active but-
tons on the front panel to:
• Read the measurements.
• Modify the integration constant.
• Define the zero point.
• Program the parameters of the connected sensor.
• Modify the communication parameters (RS-232-C or IEEE-488).
• Activate the analog outputs where available.
Refer to the chapter entitled: "Off-line use".
Controller for Laser Diode Sensors
AT TE
NT IO
N RA
EN CA YO NN
EM EN
S D' OU
EX PO T LA SE
VE RT
SI TI ON R
UR E
DA NG
AU FA ER EU
IS CE SE
AU
2