Modification Of Rs-232-C Parameters; Modification Of Ieee-488 Parameters - Newport LDS1000 User Manual

LDS1000
EDH0170FE1010 – 09/98
7.4.2.1

Modification of RS-232-C Parameters

The RS-232-C interface is active if the display is as follows:
Otherwise, the
In mode the values of the parameters stored for the RS-232-C interfa-
ce can be modified.
For all the parameters, a modification menu uses the following functions:
(F1) Scrolling of possible parameters (and their status).
(F4) Next parameter.
(F5) Save and exit
(F5) Return to main menu.
List of parameters:
MSG TERM
BAUD RATE Transmission
WORD LENGTH
STOP BITS
PARITY
7.4.2.2

Modification of IEEE-488 Parameters

The IEEE-488 interface is active if the display is as follows:
Otherwise, the
In mode the values of the parameters stored for the IEEE-488 interfa-
ce can be modified.
For all the parameters, a modification menu uses the following functions:
(F1) Scrolling of possible parameters (or cursor movement).
(F2) Lower value (-1 for digital values).
(F3) Next highest value (+1 for digital values).
(F4) Next parameter.
(F5) Save and exit
(F5) Return to main menu.
Controller for Laser Diode Sensors
=> (F4) =>
(F1) key provides access to this menu.
mode.
Designation Available Values
End of sequence CR; LF; CR LF; LF CR
terminator
300; 600; 1200; 2400;
Speed 4800; 9600; 19200
Length of 7; 8
the string sended
Stop bit 1; 2
number
Parity NONE; ODD; EVEN
=> (F4) =>
(F1) key provides access to this menu.
mode.
24
(F2)
Default Value
CR
9600
8
1
NONE
(F2)