Ta Query Sensor Parameters; Tb Error Description - Newport LDS1000 User Manual

LDS1000
10.5.12
1TA,RT,04512,1,µrad,00102,00241
Related commands
10.5.13
Related command
EDH0170FE1010 – 09/98
TA
Use MNL
Syntax xxTA
Parameter xx
Description
Response
Errors B
D
S
Example 1TA
TB
TE
TB
Use MNL
Syntax TBaa
Parameter aa
Description
Response TBaabb
Errors D
S
Example TB@
TB@ No error
TE
Controller for Laser Diode Sensors
Query Sensor Parameters
RMT ACT
Axis number: 1 for Y and 2 for Z.
Possible errors
xx ≠ 1 and xx ≠ 2
Error B.
Read parameters of a current sensor axis:
TYPE : RT or TR.
COEF : 00100 to 29999.
INCR : 0,1; 0,2; 0,5; 1; 2; 5; 10; 20; 50.
UNIT : µrad; sec; mrad; nm; µm; mm; unit.
OFS1 : 00000 to 32767.
OFS2 : 00000 to 32767.
The parameters are separated by commas.
Sensor axis parameters.
Incorrect axis number.
Execution not allowed.
Communication time-out.
| Read the parameters of axis 1 (Y) of the current sensor.
| Typical parameters for an STR500-H autocollimator.
Read error.
Read error code.
Error Description
RMT ACT
Error code in ASCII format (@ to U).
If there is no parameter
Read message related to a an error code (parameter aa). Read
current error message if aa is missing.
aa = Error code queried.
bb = Error description.
Execution not allowed.
Communication time-out.
| Read error message @.
| No error.
Read error code.
48
read current error.