Newport LDS1000 User Manual page 75

LDS1000
This equipment is a nonfunctional part designed to be connected to a LDS
Series Laser Diode Sensor supplied by NEWPORT.
The equipment composed of the sensor, the connection cable and the LDS1000
electronic controller, identified with the "
requirements of:
• The European Directive 89/336/EEC, concerning Electro-Magnetic
Compatibility.
Generic standards
Emission:
Immunity:
• The Low Voltage European Directive 73/23/EEC.
Applicable standards
EN 60950:
EN 60825-1: "Safety of laser equipment radiation".
NEWPORT shall not be liable for any damage caused by:
• Modification of the product.
• Connecting the sensor to the LDS1000 Controller with a modified cable, or
one not supplied by us.
• Connection to additional equipment that does not comply with EC standards.
• Connection to additional equipment with cables that do not comply with
EC standards.
EDH0170FE1010 - 09/98
12 - Appendices
A Example of Program Using RS-232-C Link ............................................62
B IEEE-488 Link Characteristics ................................................................63
IEEE-488 Functions Supported by LDS1000 Controller ......................63
IEEE-488 Function Subsets .....................................................................64
SRQ Using .................................................................................................64
Service form .........................................................................................................67
EN50081-1, "Residential, Commercial and Light Industry" stan-
dards.
EN50082-2, "Industrial" standards.
"Safety of data processing equipment".
...............................................................................62
" mark, meets all the necessary
vi
Table des matières