Charger, Signet - Taylor-Dunn TT-316-36 Service And Replacement Parts Manual

Model TT-316-36

CHARGER, SIGNET

Model HBS series charger
shown
Note: There are no user serviceable components inside the charger
Note: The charger AC cord is an integral part of the charger. When replacing the charger, do not cut and splice the
AC cord. Cutting the AC cord will void the charger warranty.
Note: The Signet model HBS series charger replaces all previous Signet models.
QTY PART # DESCRIPTION
2 75-318-20 Butt splice
2 75-320-51 Knife connector
1 76-200-00 AC plug, 115 volt
Standard Single Phase AC wire Color Codes as of 2010.
Older systems may use a alternate color code.
Refer high voltage wiring repairs to a qualified technician
United States / Canada
• Neutral: White
• Hot: Black or Red
• Ground: Green
IEC (Europe) and United Kingdom
• Neutral: Blue
• Hot: Brown
• Ground: Green/Yellow
MT-316-03
Note: The harness connectors and AC plug
are not included with the charger.
Model HBS Charger
PART #
79-303-41
79-309-42
ILLUSTRATED PARTS
DESCRIPTION
36 volt Flooded Batteries (WET, FLA)
36 volt Sealed Batteries (GEL, SLA, AGM)
Page-109