Taylor-Dunn TT-316-36 Service And Replacement Parts Manual page 18

Tool List
The tools shown here are generic for
servicing Taylor-Dunn vehicles. Not all tools
will be required for servicing this vehicle.
Controller Programming:
Sevcon: 62-027-63 "PCpaK Cable lead and
application."
Curtis AC: 62-027-66 "1314 PC Programming
Station"
Molex # 11-300-02: Pin Removing Tool
Removes 0.062 diameter pins from Molex
rectangular harness connectors. Not
available from Taylor-Dunn. Purchase from
any local electronics distributor.
Page 18
62-027-32: Throttle Module Analyzer
Tests the throttle module in or out of the
vehicle
62-027-61 and -62: Sevcon System
Handset
Diagnostics and adjustments (-62 only)
of the Sevcon Power Pak and Micro Pak
control systems.
Molex # 11-300-06: Pin Removing Tool
Removes 0.093 diameter pins from Molex
rectangular harness connectors. Not
available from Taylor-Dunn. Purchase from
any local electronics distributor.
TT-316-36
75-089-00: Throttle Module Test Harness
Used in conjunction with a volt meter to test
the throttle module. The module must be
installed in a working control system.
Note: Part # 62-027-31 includes instructions
62-027-00: Test Light
Used for testing electrical circuits. Switchable
for 12, 24, 36, 48 volt systems.
Required to complete troubleshooting
provided in the vehicle service manuals.
75-442-55: Pin Removing Tool
Removes pins from Molex Mini-Fit harness
connectors.
MT-316-06