Charger, Signet - Taylor-Dunn R0-380-36 Service And Replacement Parts Manual

Replacement Parts

CHARGER, SIGNET

Note: There are no user serviceable components inside the charger
Note: The charger AC cord is an integral part of the charger. When replacing the charger, do not cut
and splice the AC cord. Cutting the AC cord will void the charger warranty.
Note: The Signet model HBS series charger replaces all previous Signet models.
QTY PART # DESCRIPTION
2 75-318-20 Butt splice
2 75-320-51 Knife connector
1 76-200-00 AC plug, 115 volt
Standard Single Phase AC wire Color Codes as of 2010.
Note: Older systems may use a alternate color code.
Refer high voltage wiring repairs to a qualified technician
United States / Canada
Neutral: White
Hot: Black or Red
Ground: Green
IEC (Europe) and United Kingdom
Neutral: Blue
Hot: Brown
Ground: Green/Yellow
Page 120
Note: The harness connectors and AC plug
are not included with the charger.
Model HBS Charger
PART #
79-303-41
79-303-42
DESCRIPTION
Flooded Batteries (WET, FLA)
Sealed Batteries (GEL, SLA, AGM)
R-380 DC System
MR-380-03