Hardware Information; Hex Nuts; Hex Lock Nuts (Stover); Other Nuts - Taylor-Dunn TT-316-36 Service And Replacement Parts Manual

TT-316-36

Hex Nuts

Nuts with no markings are to be treated as S.A.E. Grade 2
S.A.E. Grade 5
5.8
Metric Nuts

Hex Lock Nuts (stover)

Lock nuts use a letter to indicate the grade of the nut. Grade A' locknuts would be the equivelent of Grade
'2' hex nuts, Grade 'B' as Grade '5' and Grade 'C' as Grade '8'.
NOTE: Nuts with no markings are to be treated as S.A.E. Grade A
S.A.E. Grade B
Grade L'9

Other Nuts

Other nuts used by Taylor-Dunn
MT-316-06
8.8 10.9
® should be treated as S.A.E. grade A
Hardware
S.A.E. Grade 8
12.9
S.A.E. Grade C
Page 91