Platform Assembly; Powered Extension Control Console - Skyjack SJ 7135 Operating Manual

Visual & Maintenance Inspection
Platform Control

2.3-9 Platform Assembly

Ensure that you maintain three points of
contact to mount/dismount platform.
1. Use the ladder of aerial platform to access
platform.
2. Close the gate.
-
Ensure there are no loose or missing
parts and there is no visible damage.
-
Ensure all fasteners are securely in
place.
-
Ensure all railings are properly positioned
and secured.
-
Ensure gate is in good working order.
• Lanyard Attachment Anchors
-
Ensure attachment rings are secure and
have no visible damage.
• AC Outlet on Platform
-
Ensure outlet has no visible damage and
free from dirt or obstructions.
Page 22
It is the responsibility of the operator to read, completely understand and follow all instructions and warnings
Console
WARNING
contained in this operating manual and on the aerial platform.
Section 2 - Familiarization
Platform
Railing
• Platform Control Console
-
Ensure all switches and controller are
returned to neutral and are properly
secured.
-
Ensure there are no loose or missing
parts and there is no visible damage.

• Powered Extension Control Console

(If Equipped)
-
Ensure all switches are returned to
neutral and are properly secured.
-
Ensure there are no loose or missing
parts and there is no visible damage.
WARNING
Ensure that you maintain three points of
contact to mount/dismount platform.
3. Use the ladder to dismount from platform.
Mid Size & Full Size RTs
Platform
Assembly
Engine Powered