Section 2 - Familiarization
Drive/Steer Enable
Trigger Switch
Torque Switch
Low/High Speed Range
Switch
Horn
Pushbutton
Glow Plug
Pushbutton
8. Select low/high throttle switch to "
throttle position.
Do not start the engine in the high
throttle position.
9. If diesel engine is cold, depress and hold
"
" glow plug pushbutton for 15 to 20
seconds.
10. Depress and hold "
pushbutton to start the engine.
• Test Emergency Stop
1. Push in "
" emergency stop button.
Result: Engine should shut down and
aerial platform functions should not
operate.
• Test Lift Enable
1. Pull out "
" emergency stop button.
2. Restart the engine.
Mid Size & Full Size RTs
Engine Powered
It is the responsibility of the operator to read, completely understand and follow all instructions and warnings
Engine Start
Pushbutton
Lift Enable
Pushbutton
" low
CAUTION
" engine start
contained in this operating manual and on the aerial platform.
Rocker Switch
Drive/Steer
Controller
Low/High Throttle
Switch
Operation Light
Raise/Off/Lower
Switch
Off/Lift/Drive Key
Switch
Emergency Stop
Button
3. Select and hold raise/off/lower switch to
"
" raise position without pressing lift
"
" enable pushbutton.
Result: Platform should not rise.
• Test Platform Raising/Lowering
WARNING
Be aware of overhead obstructions
or other possible hazards around the
aerial platform when lifting.
1. Press and hold lift "
then select and hold raise/off/lower switch
to "
" raise position and raise the
platform to an approximate height of 0.5
meter. Release switch to stop.
Result: Platform should rise.
2. Press and hold lift "
then select and hold raise/off/lower switch
to "
" lower position and lower the
platform fully. Release switch to stop.
Result: Platform should lower.
Function Tests
" enable pushbutton,
" enable pushbutton,
Page 27