Test Enable Trigger Switch; Test Horn; Test Steering; Test Driving - Skyjack SJ 7135 Operating Manual

Function Tests
Drive/Steer Enable
Trigger Switch
Torque Switch
Low/High Speed Range
Switch
Horn
Pushbutton
Glow Plug
Pushbutton

• Test Enable Trigger Switch

1. Ensure outriggers are fully retracted. Refer
to Section 3.8-10
operation.
2. Ensure path of intended motion is clear.
3. Select off/lift/drive key switch to "
drive position.
4. Without activating "
switch, attempt to drive and steer the aerial
platform.
Result: Drive and steer functions should
not operate.

• Test Steering

1. Activate and hold enable trigger switch,
and then press rocker switch on top of
controller to "
right.
Result: Steer wheels should turn left and
right.

• Test Horn

1. Push " " horn pushbutton.
Result: Horn should sound.
Page 28
It is the responsibility of the operator to read, completely understand and follow all instructions and warnings
Engine Start
Pushbutton
Lift Enable
Pushbutton
for hydraulic outriggers
" enable trigger
" left and "
contained in this operating manual and on the aerial platform.
Rocker Switch
Drive/Steer
Controller

• Test Driving

1. Ensure path of intended motion is clear.
2. Activate and hold "
switch.
3. Slowly move controller fully
" and then return handle to center
position.
Result: Aerial platform should move in
forward direction, and then come to a
stop.
4. Slowly move controller fully "
backward, and then return handle to center
position.
Result: Aerial platform should move in
reverse direction, and then come to a
stop.
"
Section 2 - Familiarization
Low/High Throttle
Switch
Operation Light
Raise/Off/Lower
Switch
Off/Lift/Drive Key
Switch
Emergency Stop
Button
"enable trigger
" forward,
Mid Size & Full Size RTs
Engine Powered
"