Test Lowering Warning; Test Powerdeck Enable (If Equipped); Test Extension Platform; Test Emergency Powered - Skyjack SJ 7135 Operating Manual

Mid-size & full-size rough terrain series
Table of Contents

Advertisement

Function Tests
Drive/Steer Enable
Trigger Switch
Torque Switch
Low/High Speed Range
Switch
Horn
Pushbutton
Glow Plug
Pushbutton

• Test Lowering Warning

1. Select off/lift/drive key switch to "
position.
2. Fully lower the platform.
Result: Alarm should sound the entire way
down.

• Test Powerdeck Enable (If Equipped)

1. Select and hold extend/retract switch to
the "
selecting "
Result: Platform should not extend.
• Test Extension Platform(s)
(If Equipped)
1. Extend each extension platform to about
.5 meter (refer to
3.8-9).
Result: Each extension platform should
extend.
2. Retract each extension platform fully.
Result: Each extension platform should
fully retract.
Page 30
It is the responsibility of the operator to read, completely understand and follow all instructions and warnings
Engine Start
Pushbutton
Lift Enable
Pushbutton
" lift
" extend position without
" enable switch.
Section 3.8-8
or
Section
contained in this operating manual and on the aerial platform.
Section 2 - Familiarization
Rocker Switch
Drive/Steer
Controller
Low/High Throttle
Switch
Operation Light
Raise/Off/Lower
Switch
Off/Lift/Drive Key
Switch
Emergency Stop
Button

• Test Emergency Powered

Extension Platform Retraction
Switch (Models 92xx)
1. Extend both powered extension platforms
to about .5 meter.
2. Push in "
" emergency stop button to
shut down the engine.
WARNING
Ensure that you maintain three points
of contact when using the ladder to
mount/dismount platform.
3. Use the ladder to dismount from
platform.
4. On hydraulic/electric tray, push the
emergency powered extension platform
retraction switch.
Result: Extension platforms should
retract.
Mid Size & Full Size RTs
Engine Powered

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sj 8831Sj 7127Sj 8841Sj 9250Sr2584Sr4084 ... Show all

Table of Contents