[X]-Page Jam, Open Automatic Feeder Top Cover. [28Y.xx] - Lexmark MX610 Series User Manual

Clearing jams
Jam access area
1 Automatic
document feeder
(ADF)
2 Standard bin
3 Front door
4 Multipurpose
feeder
5 Tray 1
6 Tray [x]
7 Rear door
8 Finisher rear door
9 Finisher output bin
[x]‑page jam, open automatic feeder top cover. [28y.xx]
1
Remove all original documents from the ADF tray.
Note: The message is cleared when the pages are removed from the ADF tray.
2
Open the ADF cover.
Printer control panel message
[x]‑page jam, open ADF to clear
jam. [28y.xx]
[x]‑page jam, clear standard
bin. [20y.xx]
[x]‑page jam, open front
door. [20y.xx]
[x]‑page jam, clear manual
feeder. [25y.xx]
[x]‑page jam, remove tray 1 to clear
duplex. [23y.xx]
[x]‑page jam, open tray [x]. [24y.xx] Pull the indicated tray out, and then remove the jammed
[x]‑page jam, open rear
door. [20y.xx]
[x]-page jam, remove all pages
from the finisher's output bin.
Leave paper in bin [45y.xx]
[x]-page jam, remove all pages
from the output bin. Leave paper
in bin [45y.xx]
What to do
Remove all paper from the ADF tray, and then remove the
jammed paper.
Remove the jammed paper.
Open the front door, then remove the toner cartridge and
imaging unit, and then the jammed paper.
Remove all paper from the multipurpose feeder, and then
remove the jammed paper.
Pull out tray 1 completely, then push the front duplex flap
down, and then remove the jammed paper.
Note: You may need to open the rear door to clear
some 23y.xx paper jams.
paper.
Open the rear door, and then remove the jammed paper.
•
Open the finisher rear door, and then remove the
jammed paper.
•
Open the narrow door, and then remove the jammed
paper.
•
Move the left paper guide to the left and the right
paper guide to the right, and then remove the jammed
paper from the finisher bin.
• Open the finisher rear door and the narrow door, and
then remove any jammed pages.
229