Omron NJ Series Troubleshooting Manual page 78

3 Error Tables
Event code Event name
54010406 hex Illegal Data Posi-
tion Specified
54010407 hex Data Range
Exceeded
54010409 hex No Errors to Clear
5401040B hex No User Errors to
Clear
5401040C hex Limit Exceeded for
User-defined
Errors
5401040D hex Illegal Unit Speci-
fied
5401040F hex Unit Restart Failed
54010410 hex Text String Format
Error
54010411 hex Illegal Program
Specified
3-16
Meaning
A memory address or data • A memory address
size that was specified for
the instruction is not suit-
able.
The results of instruction • The results of instruc-
processing exceeded the
data area range of the out-
put parameter.
An instruction to clear a • An instruction to clear
Controller error was exe-
cuted when there was no
error in the Controller.
An instruction to clear user- • An instruction to clear
defined errors was exe-
cuted when there was no
user-defined error.
An attempt was made to • An attempt was made
use the Create User-
defined Error instruction to
create more than the maxi-
mum number of user-
defined errors.
The Unit specified for an • A Unit that does not
instruction does not exist.
• A Unit that is in the
Restarting a Special I/O • The Special I/O Unit or
Unit or CPU Bus Unit failed.
The text string input to an • The text string that is
instruction is not correct.
• The input text string
The program specified for • The program speci-
an instruction does not
exist.
Assumed cause
Maj Prt
that was specified for
an instruction was out-
side the valid range.
The data size that was
specified for an
instruction exceeded
the valid range. For
example, the data type
of a variable and the
data size may not
agree.
tion processing, such
as the number of array
elements, exceeded
the data area range of
the output parameter.
a Controller error was
executed when there
was no error in the
Controller.
user-defined errors
was executed when
there was no user-
defined error.
to use the Create
User-defined Error
instruction to create
more than the maxi-
mum number of user-
defined errors.
exist in the Unit config-
uration information
was specified.
Unit configuration
information was speci-
fied, but the Units
does not actually exist
in the Controller.
CPU Bus Unit is pro-
cessing data.
input to the instruction
for conversion to a
number does not rep-
resent a number or it
does not represent a
positive number.
does not end in NULL.
fied by the function
does not exist (e.g., it
was deleted).
NJ-series Troubleshooting Manual (W503)
Level
Refer-
ence
Min Obs Info
S NJ-series
Instruc-
tions Ref-
erence
Manual
(Cat. No.
W502)
S Same as
above.
S Same as
above.
S Same as
above.
S Same as
above.
S Same as
above.
S Same as
above.
S Same as
above.
S Same as
above.