Omron NJ Series Troubleshooting Manual page 75

Machine automation controller sysmac
Hide thumbs Also See for NJ Series:
Table of Contents

Advertisement

Errors Related to FINS Communications
Event code
Event name
14010000 hex
CPU Bus
Unit Setup
Area Error
34100000 hex
IP Address
Table Setting
Error
34130000 hex
FINS/TCP
Connection
Table Setting
Error
34110000 hex
Unknown
Destination
Node
80100000 hex
Packet Dis-
carded
80110000 hex
Packet Dis-
carded
NJ-series Troubleshooting Manual (W503)
Meaning
Assumed cause
An error was
• The power supply to the Con-
detected in the
troller was interrupted or com-
memory check of
munications with the Sysmac
the Setup Area for
Studio were disconnected while
CPU Bus Units.
downloading the CPU Bus Unit
Settings.
The IP address
• The IP address conversion
table settings are
method is set to the combined
incorrect.
method or the IP address table
method, but the IP address
table settings are incorrect.
The FINS/TCP con-
• The power supply to the Con-
nection table is
troller was interrupted or com-
incorrect.
munications with the Sysmac
Studio were disconnected while
downloading the FINS/TCP
connection table.
The send destina-
• The send destination node was
tion node is not
not found when a FINS mes-
known.
sage was sent.
One or more pack-
• A FINS response addressed to
ets were discarded.
the CPU Unit was received.
• The send designation Unit for
the FINS response does not
exist.
One or more pack-
• An attempt was made to send a
ets were discarded.
FINS response with over 2002
bytes.
• An attempt was made to route a
FINS response with over 2002
bytes.
• Packet was received with a No
Such Unit routing error.
• Packet was received with a
Routing Error routing error.
• Packet was received with a No
Routing Table routing error.
• Packet was received with an
Event Area Size Over Limit
routing error.
• There is insufficient space in
the internal buffer.
• FINS message routing failed
because the communications
load is too high.
3 Error Tables
Level
Maj
Prt
Min
Obs
Info
S
NJ-series
CPU Unit Soft-
ware User's
Manual (Cat.
No. W501)
S
Same as
above.
S
Same as
above.
S
Same as
above.
S
Same as
above.
S
Same as
above.
Reference
3
3-13

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nj501-1500Nj501-1400Nj501-1300Nj301-1200Nj301-1100

Table of Contents