Omron NJ Series Troubleshooting Manual page 22

Unit Versions
Unit Versions and Sysmac Studio Versions
The events that can occur depend on the unit versions of the NJ-series CPU Unit and the EtherCAT
slaves. You must use the corresponding version of Sysmac Studio to display events that were added for
version upgrades when troubleshooting from the Sysmac Studio or from the Troubleshooter on an NS-
series PT. Refer to the product manuals for information on the unit versions of the CPU Unit and Ether-
CAT slaves, and for the relationship with the version of the Sysmac Studio.
Unit Version Notation
In this manual, unit versions are specified as shown in the following table.
Product nameplate
"Ver.1.0" or later to the right of
the lot number
20
Notation in this manual
Unit version 1.0 or later Unless unit versions are specified, the information in this manual
applies to all unit versions.
Remarks
NJ-series Troubleshooting Manual (W503)