Accessing The Hpe Oneview Maintenance Console From The Frame Link Module; Connecting To The Hpe Oneview Maintenance Console Using Ssh; Creating A Support Dump File - HPE Synergy 12000 Frame Setup And Installation Manual

Hide thumbs Also See for Synergy 12000 Frame:

Table of Contents

Accessing the HPE OneView maintenance console from the frame link

module

Procedure

1. Connect locally to the HPE Synergy console.

2. Select the Screen icon at the top right of the page.

3. Select an HPE Synergy Composer appliance from the Appliances menu.

A blank text window appears.

4. Press Enter.

5. At the login prompt, log in using the username: maintenance.

The HPE OneView maintenance console opens.

For additional instructions on using the HPE OneView maintenance console, see the HPE OneView User

Guide for HPE Synergy on the Hewlett Packard Enterprise website.

Connecting to the HPE OneView maintenance console using SSH

NOTE: Hewlett Packard Enterprise recommends the use of these tools for accessing the HPE OneView

maintenance console through an SSH connection:

•

PuTTY

•

MTPuTTY

•

vSphere/vCenter Console (HPE BladeSystem c7000)

•

Hyper-V console (HPE BladeSystem c7000)

Access the appliance console using this procedure:

Procedure

1. Open one of the recommended tools on your local computer.

2. Access the appliance by specifying its fully qualified domain name or its IP address.

3. Enter the user name maintenance at the login prompt.

4. Log in to the HPE OneView maintenance console.

5. Provide the local administrator credentials when prompted.

Creating a support dump file

This procedure describes how to use the HPE Synergy maintenance console to create a support dump

file from the local appliance (the appliance on which the HPE Synergy maintenance console runs) and

store it on a USB drive.

If the local appliance is the active appliance in an appliance cluster and if the standby appliance is

reachable, the support dump contains the data for both cluster members. Otherwise, a support dump is

created with data for the local appliance only.