Power Supply Led - HPE Synergy 12000 Frame Setup And Installation Manual

Item Description
7 LINK port activity LED Reports LINK port activity:
8 LINK port
9 LINK port connectivity
LED
10 Monitor port
1
The 10GBASE-T MGMT port automatically negotiates speed to 10GbE or 1GbE based on the connection.

Power supply LED

Power LED
Off
Solid green
Flashing amber
24 Power supply LED
Function
• Flashing green = Activity on the LINK port
• Off = No activity on the LINK port
1
A 10GBASE-T RJ45 connector that provides two functions:
• Provides high availability management network connectivity
between:
◦ LINK ports on two frame link modules in the same frame for a
single frame configuration
◦ Frame link modules in different frames as part of a management
network ring in a multiframe configuration
• Provides connectivity as part of a management network ring which
connects multiple frames for automatic discovery by HPE OneView.
Reports LINK port connectivity:
• Solid green = LINK port is connected.
• Off = LINK port is not connected.
Allows connection to the frame using a monitor device or an active
monitor port adapter.
Condition
No input power to the power supply or power supply failure. Connect to
the HPE Synergy console and check for power supply error messages.
Normal operation
Warning. Connect to HPE OneView Hardware Setup to troubleshoot.