Installing The Frame Into The Rack - HPE Synergy 12000 Frame Setup And Installation Manual

Installing the frame into the rack

WARNING: Always use at least four people to lift a frame into the rack. If the frame is being loaded
into the rack above chest level, a fifth person must assist with aligning the frame with the rails while
the other four people support the weight of the frame.
NOTE: You can install the frame into the rack using a mechanical lift. If you choose the mechanical lift
installation, resume the frame installation at step 5.
Procedure
1. Attach the lift handles to the frame.
a. Align each lift handle to the frame spools.
b. Press the release button, and then pull the lift handle up until it locks in place.
2. Line up the frame with the rack, set the back end of the frame on the rack rails and slide it in.
Installing the frame into the rack 31