Connecting The Optional Hpe Apm Module - HPE Apollo a6000 Quick Setup Instructions Manual

• Connect one RJ-45 from each chassis to the top-of-rack
switch.
• Connect the chassis together using a daisy chain configuration,
and then connect one RJ-45 from one chassis to the
top-of-rack switch.

Connecting the optional HPE APM module

IMPORTANT: If you have an HPE APM module
connected to an Apollo a6000 Chassis, do not connect
the iLO port of the HPE APM module and the iLO port of
the enclosure to the network at the same time. Having
both ports connected at the same time results in a
loopback condition.
1. Connect the HPE APM module to the network (shown in
green).
2. Connect the HPE APM module to the chassis (shown in red).