Configuring Hpe Synergy; Configuring The Frame Overview; Synergy Console Frame Health & Inventory Screen - HPE Synergy 12000 Frame Setup And Installation Manual

Configuring HPE Synergy

Configuring the frame overview

Procedure
1. Verify the component installation is complete.
Review the component health on the Synergy Console Frame Health & Inventory screen.
2. Verify the frame is cabled.
For more information, see "Cabling the frame on page 58."
To test management port connections in the a ring, perform a MGMT Port Test. For more information,
see the HPE Synergy Frame Link Module User Guide at http://www.hpe.com/info/synergy-docs.
3. Verify the frame is powered up.
4. Connect to HPE OneView through the HPE Synergy console.
To access the Synergy console, you must connect locally to a frame with a Composer installed. For
more information, see "Connect to the HPE Synergy Console on page 69."
5. Use HPE OneView to verify the hardware installation.
For more information, see "Verifying installation using HPE OneView on page 76."
6. Complete the hardware setup in HPE OneView.
Synergy Console Frame Health & Inventory screen
The Frame Health & Inventory screen displays the health status of all components in a frame.
74 Configuring HPE Synergy