Installing Power Supplies - HPE Synergy 12000 Frame Setup And Installation Manual

Item Mezz slot connector identification
1 Mezzanine slot 1 (M1)
2 Mezzanine slot 2 (M2)
3 Mezzanine slot 3 (M3)
1
When installing a mezzanine option in mezzanine slot 2, processor 2 must be installed.
Full-height compute module mezzanine connector definitions
NOTE: The compute module hood label includes the exact mezzanine card locations.
The symbols in the image correspond with symbols on the rear of the frame.
Item Mezz slot connector
identification
1 Mezzanine slot 1 (M1)
2 Mezzanine slot 2 (M2)
3 Mezzanine slot 3 (M3)
4 Mezzanine slot 4 (M4)
5 Mezzanine slot 5 (M5)
6 Mezzanine slot 6 (M6)
1
When installing a mezzanine option in mezzanine slot 2, processor 3 must be installed. When installing a mezzanine
option in mezzanine slot 5, processor 4 must be installed.

Installing power supplies

WARNING: To reduce the risk of personal injury from hot surfaces, allow the power supply or power
supply blank to cool before touching it.
50 Full-height compute module mezzanine connector definitions
Supported card
types
Type C and Type D
1
Type C and Type D
Type C only
Supported card
types
Type C and Type D
1
Type C and Type D
Type C only
Type C and Type D
1
Type C and Type D
Type C
Fabric Interconnect
bay sets
1 ICM 1 and 4
2 ICM 2 and 5
3 ICM 3 and 6
Fabric Supported ICM bays
1 ICM 1 and 4
2 ICM 2 and 5
3 ICM 3 and 6
1 ICM 1 and 4
2 ICM 2 and 5
3 ICM 3 and 6