Hpe Apollo Platform Manager; Hot-Plug Power Supply Calculations; Compiling The Documentation; Warnings And Cautions - HPE Apollo k6000 User Manual

HPE Apollo Platform Manager

HPE Apollo Platform Manager is an optional point of contact for system administration. HPE Apollo Platform
Manager allows you to manage and regulate power at a rack level by connecting the chassis that contains
chassis controllers.
To configure and access APM, see the HPE Apollo Platform Manager User Guide on the Hewlett Packard
Enterprise website (http://www.hpe.com/support/APM_UG_en).

Hot-plug power supply calculations

For more information on the hot-plug power supply and calculators to determine server power consumption in
various system configurations, see the Hewlett Packard Enterprise Power Advisor website (http://
www.hpe.com/info/poweradvisor/online).

Compiling the documentation

The documentation, while delivered individually and in various formats, works as a solution. Consult the
following documents before attempting installation:
• HPE Apollo k6000 Chassis Quick Setup Instructions
• HPE Apollo k6000 Chassis Rail Kit for HPE and Third Party Racks Installation Instructions
These documents provide required important safety information and decision-making steps for configuration.
To access these documents, see the Hewlett Packard Enterprise website (http://www.hpe.com/info/
Apollok6000-docs).

Warnings and cautions

WARNING: To reduce the risk of personal injury or damage to equipment, heed all warnings and
cautions throughout the installation instructions.
WARNING: To reduce the risk of personal injury or damage to the equipment, be sure that:
• The rack is bolted to the floor using the concrete anchor kit.
• The leveling feet extend to the floor.
• The full weight of the rack rests on the leveling feet.
• The racks are coupled together in multiple rack installations.
• Only one component is extended at a time. If more than one component is extended, a rack might
become unstable.
6 HPE Apollo Platform Manager