Performing A Frame Link Module Factory Reset - HPE Synergy 12000 Frame Setup And Installation Manual

This action displays a progress bar while it is running. Logins are disabled automatically. When the
appliance reset is completed after several minutes, you can log in and set up your appliance as you
did for the first time.

Performing a frame link module factory reset

NOTE: This procedure only factory resets the frame link modules installed in the frame. It does not factory
reset any other components installed in the frame.
NOTE: The frame link module can be factory reset by pressing the front panel reset button until the front
panel UID flashes or by using the HPE Synergy Console Actions menu. Hewlett Packard Enterprise
recommends using the HPE Synergy Console to perform a factory reset.
Procedure
1. Connect to the HPE Synergy Console.
2. Select Actions > FLM Diagnostics > Factory Reset.
A progress bar displays.
90 Performing a frame link module factory reset