Connecting To The Hpe Synergy Console Using A Keyboard, Video Monitor, And Mouse - HPE Synergy 12000 Frame Setup And Installation Manual

Connecting to the HPE Synergy Console using a keyboard, video monitor,
and mouse
NOTE: This procedure describes connecting a keyboard and mouse to a monitor with an integrated USB
hub. Alternatively, you can use a standalone USB hub to connect a keyboard and mouse.
Prerequisites
A frame link module is installed in a frame link module bay.
Procedure
1. Connect a monitor cable to the monitor port and connect a USB cable to the USB port on either:
• The Front panel module on the front of the frame.
• One of the Frame Link Modules on the rear of the frame.
70

Connecting to the HPE Synergy Console using a keyboard, video monitor, and mouse