Cabling The Frame - HPE Synergy 12000 Frame Setup And Installation Manual

Cabling the frame

WARNING: To reduce the risk of electric shock or injury due to high-current electrical energy, be
sure that all power is completely disconnected at the source before beginning any power
connections to the power bus bars or power bus box.
WARNING: Be sure that all circuit breakers are locked in the off position before connecting any
power components.
Procedure
1. Connect the power cables. Connect to the power source in your facility to each of the installed power
supplies, and power up the frame.
For more information, see Power cabling on page 67.
2. Connect the network cables.
For more information, see Network cabling on page 59.
3. Connect to the Synergy console.
For more information, see Connect to the HPE Synergy Console on page 69.
58 Cabling the frame