Audible Signals; Function Map; Sys (System) Mode; Aspirating Speed - Labnet Excel P3600L-10 Instruction Manual

5.1 Audible Signals

The audible signals are beneficial when familiarizing yourself with the operating procedure of the Labnet Excel™ electronic pipettor.
They can also be switched off if desired (Section 6.3.)
Low-tone beep: Aspirating

High-tone beep: Dispensing/error codes

2 beeps: MD/MIX/SE mode cycle or Reset routine is completed


5.2 Function Map

The main menu of the Labnet Excel™ electronic pipettor includes five function modes (SYS, AUTO, MD, MIX, and SE). Each mode
includes various function settings (Figure 8).
Function
Mode
Function
Settings

6.0 SYS (System) Mode

SYS mode is used to set up the function settings before pipetting. Once the user has selected and stored these settings, they will no
longer need to set up these settings before every use. There are 6 function settings (Aspirating Speed, Dispensing Speed, Audible
Signals, Blow-out, Reverse Pipetting, and Program Recall) in SYS mode.
NOTES:
These 6 function settings are sequential procedures. To store these settings in memory, users have to complete the whole setting

procedure and press the Enter button
Users can use the Up/Down button


6.1 Aspirating Speed

There are 5 speeds available for both aspirating and dispensing.
1. Press the Back button
2. Press the Enter button
3. Press the Up/Down button
4. Press the Enter button
6 | LABNET EXCEL ELECTRONIC PIPETTORS
SYS AUTO
Basic
Aspirating
Aspirating/
Speed
Dispensing
Dispensing
Speed MIX
Audible
Mix Number
Signals
(1,2,3,...)
Blow-out
Mix Volume
Reverse
Pipetting
Program
Recall
Figure 8. Function map.
when the LCD displays PROG.
to move back and forth to the previous function settings.
to enter the function mode selection. Then press Up/Down button
to confirm the selection of SYS mode and the aspirating speed symbol
to change the aspirating speed ( : Slowest, : Fastest).
to confirm the speed selection and move to the Dispensing Speed function setting.
Function Map
MD MIX
Dispensing Mix Number
Volume (1,2,3,...)
Dispensing
Mix Volume
Number
(1,2,3,...)
SE
SA SD
Dispensing
Number
(1,2,3,...)
Dispensing
Volume
Aspirating
Number
(1,2,3,...)
Aspirating
Volume
to select the SYS symbol (flashing).
will flash.