AC300 Series Vector Control Inverter Manual
Installation and Size
Installation Instructions and Schematic
1: Disconnect the inverter from the power supply. After the keyboard is off, remove the inverter mask
2: Align the PG card socket with the EX-A/EX-B pin on the inverter, so that the socket is inserted vertically. The fixing
buckle will automatically clamp the PG card without screwing.
Board size chart
PG Card Manual
66.3
12
3
56.6
184
AC300 Series Vector Control Inverter Manual
Revision history
Date
Version
Sept. 4, 2018
Initial issue
PG Card Manual
Update content
Editor
185