Chapter 2 Mechanical Installation; Installation Environment; Installation Space And Directions - Veichi JT550 Series Manual

Table of Contents

JT550 Series Inverter Manual

2.1 Installation Environment

1. Ambient Temperature: The temperature affects the life of product. It is prohibited to run

out of ambient temperature range (-10

2. Please install the product on flame retardants and mount it vertically on mounting brackets using blots

or screws. Be sure to allow sufficient space around the inverter for heat dissipation since it generates heat

while running.

3. Please install the inverter on a flat surface where the vibration should remain lower than 0.6g, away

from punches, etc.

4. Avoid installing the inverter under direct sunlight or in humid places.

5. Avoid installing the inverter in places of corrosive, flammable and explosive gas.

6. Avoid installing the inverter in places full of oil, dust and metal particles.

2.2 Installation Space and Directions

2.2.1 Single Inverter Installation: the installation and insulation space for an inverter has to be left out

based on its different power ratings.

2.2.2 Multiple Inverters Installation: Inverters dissipate from bottom to top. Therefore, when multiple

inverters are operating, they are usually installed side by side and aligned to top, especially for different

sizes of inverters.

Hot Air

Cold Air