Purchase Inspection; Nameplate; Model Specification; Chapter 1 Overview - Veichi AC300 Series Technical Manual

AC300 series vector control inverter manual
Single file 5 digital tube display
LED display
Two file 5 digital tube display
Can upload or download function code information of inverter to realize fast
Parameter copy
parameter copy.
Keyboar
Output frequency, given frequency, output current, input voltage, output
d display
State monitor voltage, motor speed, PID feedback, PID given value, module temperature
etc. monitor parameters.
,Over-voltage, under-voltage, over-current, short circuit, phase failure,
Fault alarm overload, overheat, overvoltage stall, current limit, or data protection
destroyed; Fault running state; Fault history.
altitude ≤ 1000m,above 1000m down the rated amount, each increase of
Install place 100m down the rated amount of 1%;no condensation, ice ,rain, snow, hail;
solar radiation below 700W/㎡, air pressure 70-106 kPa
Temperature, -10~+50℃, above 40℃ down the rated amount, the max temperature:60℃
humidity (no load running)
Environ
9～200Hz,5.9m/s2(0.6g)
Vibration
ment
5%—95%RH (no condensation)
Store temperature -30—+60℃
Installation Hanging type, cabinet type
Protection degree IP20
Cooling mode Forced air cooling
Overview
Can monitor one state variable
Can monitor two state variables
6
AC300 Series Vector Control Inverter Manual

Chapter 2 Before Use

2.1 Purchase Inspection

On receiving your order, please check the package and confirm intact before opening, and check if there's any
damage, scratch or dirt (damages caused during transportation are not within the company's warranty). If there's any
damage caused during transportation, please contact us or the transport company immediately.
After confirming the receipt of the goods intact, please re-confirm if the product and your order are consistent. Model
of the product is on the "MODEL" column. If you find the product model is not the one you ordered, please contact the
dealer you purchased the product or the sales department of VEICHI immediately.

2.2 Nameplate

Nameplate Position and Content

Model Specification

AC300 T 3 - 011 G /015P-
-
Code
Series
AC300
V-Level
Code
T Tri-phase
S
One-phase
Code
V-level
220V
2
380V
3
6 660V
11 1140V
Before Use
B
Code Accessory Type
B
Brake unit
Code Inverter Type
G
Heavy load
P
Light load
Code motor power(KW)
7R5 7.5
11
011
018 18.5
132 132
7