List Of Port Numbers Used On The Pcs-1/1P - Sony PCS-1/1P Operating Instructions Manual

List of Port Numbers Used on
the PCS-1/1P
When connecting one-to-one
(Default)
When "Port Number Used" is set to
"Default" in the LAN Setup menu, the PCS-
1/1P uses the following port numbers.
Signal
RAS (PCS-1/1P)
RAS
(GateKeeper)
Q.931 (dial)
Q.931 (answer)
H.245
Audio RTP
Audio RTCP
Video RTP
Video RTCP
FECC RTP
FECC RTCP
Data conference
RTP
Data conference
RTCP
When connecting one-to-one
(Custom: TCP Port Number 3000
and UDP Port Number 3000)
When "Port Number Used" is set to
"Custom" in the LAN Setup menu, the PCS-
1/1P uses the port numbers defined by the
values entered in "TCP Port Number" and
"UDP Port Number".
For example, when "TCP Port Number" is
set to "3000" and "UDP Port Number" is set
to "3100", the PCS-1/1P uses the following
port numbers.
224
Specifications
Port number
Any number from 2253
to 2255 (using
GateKeeper)
1718 or 1719 (using
GateKeeper)
Any number from 2253
to 2255
1720
Any number from 2253
to 2255
49152
49153
49154
49155
49156
49157
49158
49159
Signal Port number
RAS (PCS-1/1P) Any number from 3000
to 3002 (using
GateKeeper)
RAS 1718 or 1719 (using
(GateKeeper) GateKeeper)
Q.931 (dial) Any number from 3000
to 3002
Q.931 (answer) 1720
H.245 Any number from 3000
to 3002
Audio RTP 3100
Audio RTCP 3101
Video RTP 3102
Video RTCP 3103
FECC RTP 3104
FECC RTCP 3105
Data conference 3106
RTP
Data conference 3107
RTCP
When the H.323 MCU software is
installed (Default)
When "Port Number Used" is set to
"Default" in the LAN Setup menu, the PCS-
1/1P operated as the main terminal uses the
following port numbers.
Signal Port number
(First point)
RAS (PCS-1/ Any number from 2253 to
1P) 2263 (using Gate
Keeper)
RAS (Gate 1718 or 1719 (using Gate
Keeper) Keeper)
Q.931 (dial) Any number from 2253 to
2263
Q.931 (answer) 1720
H.245 Any number from 2253 to
2263
Audio RTP 49152
Port number
th
(N point)
49152+20 ×
(N-1)