Do not remove the two screws [1]
securing escape door shaft.
F-3-41
3.4 Electrical System
3.4.1 Finisher Controller PCB
3.4.1.1 Finisher Controller PCB
3.4.1.1.1
Rear Upper Cover
Refer to Procedure 3.1.1
3.4.1.1.2
Finisher Controller PCB
1) Disconnect all connectors [1] on the
[1]
finisher controller PCB.
2) Remove four screws [2] and remove the
finisher controller PCB [3].
Chapter 3
Removing
the
Removing
the
F-3-42
0009-4528
0009-4159
3-21