E530; E531 - Canon Finisher-T1 Service Manual

5.3.4 E530

Code Detail

E530

8001
8002

5.3.5 E531

Code Detail

E531

8001
8002
T-5-7
Error Description
Aligning plate
frontmotor
(M103)/Aligning
plate fronthome
position
sensor(PI106)
T-5-8
Error Description
Staple
motor(M111)/
Staple home
position detect
sensor(PI50)
Detection timing
The aligning plate does not return to aligning
plate front home position sensor when the
alignment plate front motor has been driven for
4 seconds.
The aligning plate does not leave the
aligningplate front home position sensor when
thealignment plate front motor has been driven
for 4 seconds.
Detection timing
The stapler does not return to the staple home
position when the staple motor has been driven
for 0.5 sec.
The stapler does not leave the staple home
positionwhen the staple motor has been driven
for 0.5 sec.
Chapter 5
0009-2681
0009-2683
5-5